Martin Bluff IMBL70 Setup Instructions

NO.
PART LIST
A
CHAIR BACK
B
SEAT CUSHION
FRONT LEG RIGHT
C
FRONT LEG LEFT
D
E
SIDE STRETCHER
Caution: Please read all instructions before assembly and check the carton for any parts that may have come
loose during shipment. It is recommended to use two or more people during the assembly process.
1 Flip the back chair (A) on a non abrasive working surface.
Install seat chair w/cushion (B) to the back chair (A) . Secure in
place by using bolt (4 and 5), spring washer (2), and flat
washer (1) using allen key (7).
B
A
D
Please register your product at MartinFurniture.com.You'll find the warranty link on the bottom of the Home Page
· Use a soft, clean cloth that will not scratch the surface when dusting.
· Use of furniture polishes are not necessary. Should you choose to use polishes, test in an inconspicuous area first.
· Using solvents of any kind on your furniture may damage your furniture finish.
· Never use water to clean your furniture as it may cause damage to the finish.
· Always use coasters under beverage glasses and flowerpots.
· Liquid spills should be removed immediately. Use a soft, clean cloth, blot the spill gently. Avoid rubbing.
· Direct sunlight may damage wood finishes.
· Extreme temperature and humidity changes can cause warping, shrinking and splitting of wood furniture. It is best to keep furniture in a
climate controlled environment.
· Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.
· In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.
Date: 01 / 2024
SET-UP INSTRUCTIONS FOR ITEM
IMBL70 SIDE CHAIR
info@martinfurniture.com
Q'TY
1 Pc
1 Pc
1 Pc
1 Pc
2 Pcs
2:
3:
STEP 1
STEP 2
C
STEP 3
E
WARRANTY PROTECTION
CARING FOR YOUR FURNITURE
1-619-671-5100
NO.
HARDWARE LIST
1
FLAT WASHER (5/16" x 19mm)
2
SPRING WASHER (5/16"x 12mm)
3 BOLT (5/16" x 2-1/8")
4 BOLT (5/16" x 1-5/8")
5
BOLT (5/16" x 3-1/8")
6 SCREW ( #4 x 1-1/5" )
7 4mm ALLEN KEY
Install front leg (C,D) and stretcher into the seat chair (B) .
Secure in place by using bolt (3), spring washer (2), and flat washer (1)
using allen key (7).
Secure with screws (6) using Phillips screwdriver (not provided)
7
Page 1 of 1
Q'TY
10 Pcs
10 Pcs
4 Pcs
2 Pcs
4 Pcs
4 Pcs
1 Pc
4
ASSEMBLY COMPLETE
4
www.martinfurniture.com
E