Advertisement
Quick Links
Thank you for purchasing this Vollrath equipment. Before operating the
equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. Save the original box and packaging. Use the packaging to
ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can
cause severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can
cause minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not
hazard-related.
To reduce risk of injury or damage to the equipment:
• Inspect the equipment before each use to make sure it is clean.
• Inspect for broken, nicked, or dull blades, and if found, replace the
blade assembly.
• Verify the pusher block head assembly and blade pack are a matched
set and are properly aligned.
• Lubricate the guide rods using a light coating of mineral oil, Petrol-
Gel, or other food-grade lubricant. DO NOT USE COOKING OIL AS IT
WILL BECOME STICKY AND MAY PERMANENTLY DAMAGE THE
EQUIPMENT.
FUNCTION AND PURPOSE
The Cucumber Slicer manual food processor is intended for slicing and
wedging vegetables.
Operator's Manual
Cucumber Slicer
Item No.
Description
55010
Slice, Wedge
©
2021 The Vollrath Company L.L.C.
Part No. 2350207-1
10/18/21
Advertisement
Related Manuals for Vollrath 55010
Summary of Contents for Vollrath 55010
- Page 1 Operator’s Manual Cucumber Slicer Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use the packaging to ship the equipment if repairs are needed.
- Page 2 FEATURES OPERATION WARNING Sharp Blade Hazard Blades are sharp and can cause cuts. To avoid injury from sharp blades, handle with caution. Prepare the Equipment 1. Verify the blade assembly and pusher block match. Each component must be for the same size slice or wedge. 2.
- Page 3 CLEANING 3. Remove the support block from the guide rods. WARNING 4. Loosen the thumbscrew and carefully remove the blade assembly. Sharp Blade Hazard Blades are sharp and can cause cuts. To avoid injury from sharp blades, handle with caution. NOTICE: Food acids will dull the blades and corrode the metal.
- Page 4 SERVICE AND REPAIR Serviceable parts are available at www.vollrath.com. To avoid serious injury or damage, never attempt to repair the unit yourself. Do not send units directly to The Vollrath Company L.L.C. Please contact Vollrath Technical Services for instructions. When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the date the unit was purchased.
Need help?
Do you have a question about the 55010 and is the answer not in the manual?
Questions and answers