Table of Contents
Advertisement
Quick Links
ENGLISH
Operator's Manual
HEAVY DUTY AUTOMATIC ELECTRIC SLICER
Item
Model
Description
Drive
HP
Voltage Amps
Plug
40907 SLR7912/N 12" Heavy Duty Automatic Slicer
Belt
3/4 hp
120V
4.7
5-15P
with Non-stick Finish
Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating
and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this
packaging to ship the equipment if repairs are needed.
Item No. 2350191-1 en Rev 11/12
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vollrath SLR7912/N
Summary of Contents for Vollrath SLR7912/N
- Page 1 5-15P with Non-stick Finish Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
- Page 2 afety recautionS nPacking the quiPment and nitial etuP When no longer needed, dispose of all packaging and materials in an To ensure safe operation, read the following statements and understand environmentally responsible manner. their meaning. Please read carefully. Before using this equipment it must be cleaned thoroughly. Clean all surfaces WARNING before use.
- Page 3 Peration leaning and anitizing To maintain the appearance and increase the service life, clean your WARNING equipment daily. Cut and Amputation Hazard. WARNING The blade on this commercial slicer is extremely sharp. Severe injury can occur if care is not used Cut and Amputation Hazard.
- Page 4 9. Unscrew the carriage tray release knob (A), tilt the carriage tray (B) and clean. See Figures 7 and 8. Figure 3. Knife Cover Figure 7. Carriage Tray Release Knob 6. Lift the knife sharpening assembly (A) and rotate it 90°, then lift to remove it.
- Page 5 „ Inspect that the slicer is working properly and in good condition before each use or at least every six months. „ If the slicer is not functioning properly do not use. Have the equipment serviced by an authorized Vollrath service agency. Note: „ The sanitizer concentration shall comply with Section 4-501.114, Manual and Mechanical Warewashing Equipment, Chemical Sanitization –...
- Page 6 Activation of the reset switch occurs rarely, but if it is activated often during Lubrication normal use, please contact a Vollrath authorized repair service center. Lubricate sliding bars at least once a month and any time that pushing the tray becomes difficult. Use the oil supplied with the equipment or food safe aintenance lubricant;...
- Page 7 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE As The Vollrath Company LLC’s only responsibility and the purchaser’s only remedy, for any breach of warranty, The Vollrath Company LLC will repair or, at its option, replace the defective product or part without charge, except as otherwise provided below: •...
- Page 8 ONLINE: Register your warranty on-line now at www.Vollrathco.com NO WEB ACCESS: If you do not have access to the web, kindly register by completing the warranty registration form and faxing it to The Vollrath Co. LLC office in the country of purchase.
Need help?
Do you have a question about the SLR7912/N and is the answer not in the manual?
Questions and answers