Using Your Nec Versa; Disc Loading - NEC VERSA E6500 Series User Manual

Table of Contents

Advertisement

Using your NEC VERSA

Removable Disk Drives
Optical Drive
The optical drive that comes with your notebook depends on the notebook configurations you
purchase.
Release Button (A)
CD into or remove a CD from the drive.
Emergency Eject Hole (B)
drive if the eject function is disabled by software or a power failure occurs. To remove a
disc, insert the end of a paper clip into the eject hole, and push in until you hear a click.
Manually open the drawer.
General Information about Optical Discs

Disc Loading

To insert a disc into the optical disc drive, follow these steps.
1. Press the Release button. The disc tray emerges a short way out of the drive door.
2. Gently pull the tray out until you can easily position a disc in the tray.
3. Put the disc, printed side up, into the circular impression in the tray.
4. Push the disc tray in until it clicks shut.
Note
Some discs vibrate when playing. This does not affect the optical disc drive.
- ejects the disc tray. Press this button when power is on to insert a
- allows you to manually remove a disc from the CD-ROM
61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa e6510 series

Table of Contents