Sterlitech Sepa FO Cell 316SS Assembly & Operation Manual
Hide thumbs
Also See for Sepa FO Cell 316SS:
- Assembly & operation manual (10 pages) ,
- Assembly & operation manual (10 pages)
Related Manuals for Sterlitech Sepa FO Cell 316SS
Summary of Contents for Sterlitech Sepa FO Cell 316SS
- Page 1 Sepa FO Cell - 316SS Assembly & Operation Manual www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024...
-
Page 2: Table Of Contents
316SS Sepa FO Cell System Assembly ............... Operation of the 316SS Sepa FO Cell ............Supplementary Operating Information ..........Accessory and Spare Part Ordering Information ................ Return Material Authorization ....................Warranty ................... Technical Assistance www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 3: Introduction
* Maximum Pressure and Temperature ratings are dependent on a variety of factors. Listed values are guidelines based upon material properties and cannot be guaranteed in every application. ** The hydraulic hand pump is sold separately and required for operation of the Sepa Cell. 316SS Sepa FO Cell www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 4: 316Ss Sepa Fo Cell Components
Polypropylene Shim ** 316 Stainless Steel O-Rings Viton* Cell Bottom 316 Stainless Steel Feed Inlet/Outlet Fittings Polypropylene Hydraulic Hand Pump Aluminum Standard, Other Materials Available Not Included, Available for purchase 316SS Sepa FO Cell www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 5: 316Ss Sepa Fo Cell Assembly
(not included) to the quick disconnect fitting on the side of the cell holder. Note: The cell holder is filled with Mobil DTE 20 Series hydraulic oil. It is recommended to use Sterlitech's hand pump to match the oil type and ensure compatibility. -
Page 6: 316Ss Sepa Fo Cell System Assembly
Feed Pump Concentrate Flow Meter Draw Solution Tank Draw Solution Flow Meter Draw Solution Pump 316SS Sepa FO Cell Concentrate Control Valve Low Pressure Tubing Draw Solution Pressure Control Valve 316SS Sepa FO Cell www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 7: Operation Of The 316Ss Sepa Fo Cell
Remove the membrane. Install the new membrane. Place the cell top back onto the cell bottom. Insert the cell into the cell holder. Repressurize the cell holder using the hand pump. 316SS Sepa FO Cell www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 8: Supplementary Operating Information
During CIP, cleaning solutions are re-circulated and, in some cases, allowed to sit for a period of time within the cell body. In some cases, the feed pump can be used to re- circulate the cleaning solutions. Refer to the Membrane Cleaning Blog linked above for recommended cleaning instructions. 316SS Sepa FO Cell www.sterlitech.com info@sterlitech.com 1-877-544-4420 Copyright © 2024... -
Page 9: Accessory And Spare Part Ordering Information
This information is not intended as a license to operate under, or a recommendation to infringe upon, any patent of Sterlitech or others covering any material or use.The foregoing may not be altered except by a written agreement signed by officers of the manufacturer. - Page 10 Sterlitech’s benchtop cross flow membrane test system provides the versatility required to innovate. Sterlitech’s comprehensive line of products is supported by the expertise of its technical specialists who can assist with application-specific product selection, and provide customized solutions where necessary. Unique problem-solving approaches, flexibility, and consistent quality have made Sterlitech Corporation a renowned global provider of filtration products and equipment.
Need help?
Do you have a question about the Sepa FO Cell 316SS and is the answer not in the manual?
Questions and answers