NEC 411I Manual page 39

For any volume setting, use ▲ ▼, Side keys or alphanumeric keys (0 to 9).
When you change this setting while a headset is connected, the changed volume will be valid only when you have a headset connected.
No. Phone mode setting
1 Ringer
2 Ringer volume
3 SMS tone
4 SMS tone volume
5 Mail tone
6 Mail tone volume
7 Key tone
8 Service tone
9 Alarm volume
0 Vibrator
Earphone setting
# Auto answer
If the selected mode is Car mode, the backlight will always be turned on. This will accelerate the battery consumption.
Settings (M1)
24
Selects the Sound or Video for incoming calls. (See "Sounds (M62)" on page 64 or "Videos (M61)" on page 64 for
details.)
If the Video is set, it will sound and will be displayed regardless of the CLI picture setting for the personal data in
Phonebook. (See "Allocating a picture as a CLI" on page 55.)
Sets the sound volume for incoming calls.
While receiving a call with your phone open, the ringer volume can also be adjusted by pressing the Side keys.
While using a wired headset, you can set the volume for the wired headset. The volume settings for the wired headset
and the speaker of the phone are saved individually.
While using a Bluetooth headset and a Bluetooth hands-free kit, however, the volume setting for the speaker of the
phone is used.
Selects the ringtone for incoming SMS messages. (See "Sounds (M62)" on page 64 for details.)
Sets the sound volume for incoming SMS messages.
Selects the ringtone for incoming Mail or MMS messages. (See "Sounds (M62)" on page 64 for details.)
Sets the sound volume for incoming Mail or MMS messages.
Turns on/off the key tone.
Turns on/off the service tone.
Sets the sound volume for Clock alarm and Schedule alarm.
Turns on/off the vibrator function.
Selects the sound output from Earphone & Speaker or Earphone.
This option affects the wired headset.
Selects whether to answer an incoming call automatically.
To use the Auto answer function, connect the headset to your phone and set the earphone volume to 1 or higher. If
the earphone volume is set to 0, you must turn the vibrator ON to use the Auto answer.
The Auto answer function only applies to the first incoming call. When you have another incoming call, you have to
answer it manually.