Scheduler (M84) - NEC 411I Manual

Clock alarm setting
(Continued)
Alarm repeat Selects alarm repeat for once, daily or day of the week.
You can select more than one day of the week at the same time.
You can remove the check by highlighting and pressing
Enter alarm text Sets the message (e.g. Wake up!) which is displayed when the alarm occurs (optional).
☛
When all settings are done, SK1 to save the setting.
The selected melody will be played when the alarm occurs if the ringer is turned on based on the current phone mode. If vibration is turned on, you
will be notified of the alarm by vibration.
Even if the phone has been switched off, the phone automatically switches itself on and sounds the alarm or vibrates at the specified time.
You can stop the alarm tone or vibration by pressing any key.

Scheduler (M84)

Scheduler enables you to enter reminders and appointments for particular time and date.
Adding a new event
☛
8 4 ➔ Highlight the day
Scheduler setting
Event date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the event.
Event end date/time Sets the day, month, year, time and am/pm (for 12 hour format) of the end of event.
Description Sets the event description (optional).
Repeat Selects repeat for One time only, Daily, Weekly or Monthly.
Reminder Turns on or off the reminder.
Reminder time Selects the time to set off the reminder prior to the event start time.
Reminder tone Associates a reminder tone with an event.
Private Sets the event as a private event.
☛
☛
When all settings are done, SK1 to save the setting.
The selected melody will be played when the scheduled event occurs if the ringer is turned on based on the current phone mode. If vibration is turned
on, you will be notified of the event by vibration.
Accessory (M8)
74
➔ to display the day's schedule list screen (if any)
You can set the reminder tone only when the Reminder is turned on.
Place a check mark to set the event as a private event. To set the event as a public event, do not place a check mark.
again.
➔ SK1