Download Print this page
Hitachi PC-AWR Operation & Installation Manual
Hitachi PC-AWR Operation & Installation Manual

Hitachi PC-AWR Operation & Installation Manual

Wireless controller

Advertisement

Quick Links

Operation & Installation Manual for Wireless Controller
Model: PC-AWR
IMPORTANT NOTICE:
● We pursue a policy of continuing improvement in design and performance of products.
The right is therefore reserved to vary specifications without notice.
● We cannot anticipate every possible circumstance that might involve a potential hazard.
● This kit is designed for combination of our Air Conditioners.
Do not use this kit itself or combination of other companies Air Conditioners.
● This product is designed for standard air conditioning only.
DO NOT use this product for specific purposes, such as restoring foods, animals & plants, precision
devices, art objects, etc.
● No part of this manual may be reproduced without written permission.
● Signal words are used to identify levels of hazard seriousness.
Definitions for identifying hazard levels are provided below with their respective signal words.
DANGER
WARNING
CAUTION
NOTICE
NOTE
● Perform the test run whether there is abnormality or not after the installation work is completed.
The usage and the maintenance should be explained to a user according to "Installation & Maintenance
Manual" of the indoor unit. Describe to keep this installation manual also.
● It is assumed that this kit will be installed and serviced by English speaking people. If this is not the case,
the customer should add safety, caution and operating signs in the native language.
● If you have any questions, contact your distributor or dealer.
● This manual gives a common description and information for this wireless controller which you operate as
well as for other models.
● DO NOT install the unit in the following places. It causes failure to the unit in many cases.
* Places where oil (including machinery oil) mist and steam drifts.
* Places where a lots of sulfide gas drifts such as in hot spring.
* Places where inflammable gas may generate or flow.
* Places where air contains high salt contents as coast regions.
* Places where there is an atmosphere of acidity or alkalinity.
● Pay attention to the following points when the unit is installed in a hospital or other facilities where
electromagnetic wave are generated from medical equipment.
* Do not install the unit in the place where the electromagnetic wave is directly radiated to the electrical
box, wireless controller cable or wireless controller.
* Install the unit at least 3 meters away from electromagnetic wave such as a radio.
● DO NOT install the unit in the place where the air flow directly catches to animals or plants.
It could be the cause of adverse affect to animals or plants.
: DANGER indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
: WARNING indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
: CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
: NOTICE is used to address practices not related to personal injury.
: NOTE is useful information for operation and/or maintenance.
P5415647

Advertisement

loading
Need help?

Need help?

Do you have a question about the PC-AWR and is the answer not in the manual?

Questions and answers

Summary of Contents for Hitachi PC-AWR

  • Page 1 Operation & Installation Manual for Wireless Controller Model: PC-AWR IMPORTANT NOTICE: ● We pursue a policy of continuing improvement in design and performance of products. The right is therefore reserved to vary specifications without notice. ● We cannot anticipate every possible circumstance that might involve a potential hazard.
  • Page 2: Setting Batteries

    WARNING ● Do not turn ON the power source, unless the preparation for test running is completed. NOTICE ● Read this manual carefully before installation work for correct performance. ● Read this manual together with the “Installation & Maintenance Manual” of the indoor unit. 1.
  • Page 3: Name Of Parts

    3. Name of Parts Controller: ● This controller is used to send commands about operation mode, timer setting, etc. to the indoor unit. Face the transmitter of the controller toward the receiver of the indoor unit and press the switch of the required operation so that commands (by infrared rays) are sent to the indoor unit.
  • Page 4: Installation Method

    TIMER FILTER DEF (yellow) on the receiver kit turns ON EMERGENCY for an instant, and the buzzer sounds. PC-AWR HEAT COOL Receiver ATTENTION: * The capable distance for transmitting using the wireless remote controller is maximum 6m.
  • Page 5 6. Optional Function Setting The display range of the wireless controller can be set, following the function to set the indoor unit. ATTENTION: The settings cannot operate correctly even if the functions which cannot set the indoor unit, are set with the wireless controller. Concerning the functions which can set the indoor unit, refer to the operation manual of the indoor unit.
  • Page 6 7. Identifying Indoor Units Installed Side by Side Operation ● Purpose This function is used when operating several receivers or indoor units side by side, to prevent a malfunction because of receiving incorrect signals from the wireless remote controllers used in other areas. Only the communication between the paired setting is possible, and 4 pairs (A, B, C, D) are available.
  • Page 7 8. Test Running by Controller 1) Turn ON the power supply for the indoor units. The “ ” lamp (yellow) on the receiver kit of the indoor unit flashes (0.25 seconds ON 0.25 seconds OFF), and then turns OFF. While the lamp is flashing, the unit will not operate because it is initializing. 2) Set the Test Run mode by pressing “Louver”...
  • Page 8 © 2015 Johnson Controls-Hitachi Air Conditioning Technology (Hong Kong) Ltd. P5415647, 2015 Printed in China...