4.
Click Open, the imported profile will then appear in the Profiles List.
3.2.6 Scan Available Networks
1.
Click Scan on the Profile Management tab (Figure 3-2), the Available Infrastructure and Ad
Hoc Networks window will appear as below.
2.
Click Refresh to refresh the list at any time.
3.
Highlight a Network Name (SSID) and click Activate to connect to the network. If no
configuration profile exists for that network, the Profile Management window will open the
General tab. Fill in the Profile name and click OK to create the configuration profile for the
network.
SMCWUSB-N2
802.11n Wireless USB 2.0 Adapter
Figure 3-9
Figure 3-10
19