Advertisement
Advertisement
Table of Contents
Related Manuals for Unox BAKERLUX SPEED.Pro
Summary of Contents for Unox BAKERLUX SPEED.Pro
-
Page 3: Precautions To Avoid Possible Exposure To Excessive Microwave Energy
DO NOT store or use gasoline or any other flammable vapors or liquids in the vicinity of this or any other appliance. The information contained in this manual is important for the proper installation, use and maintenance of this oven. Adherence to these procedures and instructions will result in satisfactory cooking results and long, trouble-free service. - Page 5 TECHNICAL DOCUMENTS IN DIGITAL FORMAT to download the documentation in digital format and the full user manual, log in to UNOX http://infonet.unox.com | http://unox.com. After registering on the portal, you will need to enter some information about your UNOX product: ■...
-
Page 7: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precau- ■ tions should be followed, including the following: WARNING – To reduce the risk of burns, electric shock, ■ fire, injury to persons, or exposure to excessive micro- wave energy: Read all instructions before using the appliance. - Page 8 10) Do not cover or block any openings on the appliance. 11) Do not store this appliance outdoors. Do not use this product near water – for example, near a kitchen sink, in a wet basement, near a swimming pool, or similar locations.
- Page 9 18) Oversized foods or oversized metal utensils should not be inserted in a microwave/toaster oven as they may create a fire or risk of electric shock. 19) Do not clean with metal scouring pads. Pieces can burn off the pad and touch electrical parts involving a risk of electric shock.
- Page 11 and correctly disposed of in compliance with local reg- ulations. The ratings plate provides essential technical informa- ■ tion that is of utmost importance for any appliance maintenance or repairs. Do not remove, damage or modify the plate. The parts protected by the manufacturer or one of its ■...
- Page 13 If the appliance does not function or if there are any ■ functional or structural alterations, disconnect the electricity supply and contact a UNOX authorized customer assistance service. Do not attempt to inde- pendently repair the appliance. For any repairs, please request UNOX original spare parts.
- Page 17 The manufacturer reserves the right to make changes to improve the appliances and accessories at any time without advance notice. Full or partial reproduction of this manual is forbidden without the consent of the manufacturer. The measurements provided are approximate and not binding. In the event of disputes, this document was originally written in Italian.
-
Page 24: The Installation Area
POSITIONING The installation area Install the appliance in areas: ■ dedicated and conforming to the cooking of industrial foods; ■ that are adequately ventilated; ■ that comply with the laws in your country regarding system safety/ safety in the workplace; ■... - Page 26 Before securing the appliance to a substructure or UNOX stand, always check they are perfectly level using a manual or digital spirit level. If the UNOX stand is not level, adjust the feet as necessary. Take care not to unscrew them completely.
-
Page 32: First Start-Up
How to connect the electrics The appliance leaves the factory with the power cable already fitted on the terminal board; the electrical connection must be made by: ■ A | fitting a power plug (not supplied) of a suitable type and load for the maximum power absorbed by the oven’s phases (data available on the attached “Technical specifications”... - Page 34 CONNECTING STACKED APPLIANCES (MAXI.LINK) The appliances are designed to be connected to accessories such as a prover. The accessories connect to the oven using automatic connectors on the back of the oven. Follow the instructions contained in the accessory and appliance packaging for information on how to fully install and manage them.
- Page 46 CERTIFICATION This oven complies with applicable sections of DHHS Federal Performance Standard 21 CFR 1030.10 with UL 923 - CSA C22.2#150 with NSF ANSI 4 Ventless operation: tested in accordance to EPA 202 Test Method, limits imposed by UL 710B...
Need help?
Do you have a question about the BAKERLUX SPEED.Pro and is the answer not in the manual?
Questions and answers