Table of Contents
Advertisement
NAT
The port number of the LAN-side application as viewed by the WAN-side application.
Priority
The preference given to outbound packets of this conversation by the StreamEngine
logic. Smaller numbers represent higher priority.
State
State for sessions that use the TCP protocol.
•
NO: None -- This entry is used as a placeholder for a future connection that
may occur.
•
SS: SYN Sent -- One of the systems is attempting to start a connection.
•
EST: Established -- the connection is passing data.
•
FW: FIN Wait -- The client system has requested that the connection be
stopped.
•
CW: Close Wait -- the server system has requested that the connection be
stopped.
•
TW: Time Wait -- Waiting for a short time while a connection that was in FIN
Wait is fully closed.
•
LA: Last ACK -- Waiting for a short time while a connection that was in Close
Wait is fully closed.
•
CL: Closed -- The connection is no longer active but the session is being
tracked in case there are any retransmitted packets still pending.
Dir
The direction of initiation of the conversation:
Out
Initiated from LAN to WAN.
In
Initiated from WAN to LAN.
Time Out
The number of seconds of idle time until the router considers the session terminated.
The initial value of Time Out depends on the type and state of the connection.
300 seconds
UDP connections.
96
Advertisement
Table of Contents
