Table of Contents
Advertisement
3.2.7
Auto Profile Selection Management
The auto selection feature allows the wireless adapter to automatically select a profile from the
list of profiles and use it to connect to the network. To add a new profile into the Auto Selected
Profiles list, please follow these steps.
1.
On the Profile Management tab, click Order Profiles....
2.
The Auto Profiles Selection management window will appear, with a list of all created
profiles in the Available Profiles box.
3.
Highlight the profiles to add to auto profile selection, and click Add. The profile will appear
in the Auto Selected Profiles box.
4.
Highlight a profile in the Auto Selected Profiles box.
5.
Click Move Up or Move Down as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, and the last profile has
lowest priority.
6.
Click OK.
7.
Check the Auto Select Profiles checkbox on the Profile Management tab.
Note:
When auto profile selection is enabled by checking Auto Select Profiles on the Profile
Management tab, the client adapter will scan for an available network. The profile with the
highest priority and the same SSID as one of the found networks will be used to connect to the
network. If the connection fails, the client adapter will try the next highest priority profile that
matches the SSID until an available network is found.
Figure 3-10
- 13 -
SMCWCB-G2
User Guide
Advertisement
Table of Contents
