Configure Date/Time; Select Profile; Device Status; Internet Radio - SMC Networks 802.11g User Manual

Configure Date/Time

The date and time formats can be set by selecting this menu . First the Select Time Zone menu offers a choice of 32 standard
zones, then Daylight Saving can be enabled or disabled and, finally, the Select Time Format menu offers 5 display formats
for the date and time, which are obtained automatically from the Internet.

Select Profile

If Profile Management is enabled, the Select Profile item will be seen. It can be used to change the active Profile. The
active profile is identified by an asterisk ( [*] ). To change profile, simply highlight the new profile and select it.The SMCWAA-
G will then display the message Restart Device while the new Profile is being activated.

Device Status

Select this useful item to scroll up/down through a list of all settings in the active Profile. This is pure information – nothing
can be changed while scrolling through this .

Internet Radio

Using an Internet login account, you can set up personalized radio favorite lists with your web browser and either have them
downloaded daily to your SMCWAA-G automatically, or download manually, whenever you want.
The three items in this menu allows you to:
1. Show the Radio List Version currently installed on the SMCWAA-G,
2. Enable/Disable Automatic Update (using the [*] and [ ] icons) and
3. Start a Manual Update immediately
Note: The Internet Radio options cannot be set using the SMCWAA-G PC Utility.

Configuration Wizard

The SMCWAA-G Configuration Wizard guides you through the process of configuring network profiles. It is used when you
want to use the remote control to:
• Install the SMCWAA-G for the first time (see Configuring the SMCWAA-G on page 10)
• Make changes to your network profile settings or
• Explore the more advanced options offered by the SMCWAA-G.

Network Information Needed by the Configuration Wizard

The Configuration Wizard guides you through the setup process, prompting you to select or edit all the settings for any of
the available SMCWAA-G Profiles.
Notes:
1. The SMCWAA-G determines some settings automatically during its search for available networks. Therefore it may not
need to prompt you for all of settings during the process described below.
2. You can leave the Configuration Wizard at any time by pressing
want to exit the Wizard and discard all changes.

Configuration Wizard Menu

S C
TARTING THE ONFIGURATION
The Configuration Wizard will start automatically the first time you power up your SMCWAA-G.
To start the Configuration Wizard at a later time:
1. Press to display the Configuration menu.
W
IZARD
SMCWAA-G EZ-Stream™ 802.11g
Wireless Audio Adapter
again. You will then be asked to confirm that you
15