Swivel bracket for 4e/43-series lightheads (2 pages)
Summary of Contents for Whelen Engineering Company AEROLEDS AeroSun EVO IV Series
Page 1
Installation Instructions AeroSun EVO IV AeroLEDs, LLC 8475 W. Elisa St. Boise, ID, 83709 208-850-3294 NOTE: A printed copy of this document may not be the latest revision. It is the responsibility of the user to ensure that the latest revision is used. The latest revision of this document may be printed from the AeroLEDs electronic document repository.
REVISION RECORD Description Date Author Updated Logo; added P65 warning 12/06/2024 J. Blanchfield All pages revised and format update 06/28/2024 R. Edmark All pages revised 03/26/2018 J. Blanchfield Singular page revised 03/28/2017 D. Wilkinson Original Version 06/30/2016 D. Wilkinson 0100-0003 AeroSun EVO IV Installation Rev_D.docx Page 2 of 9...
TABLE OF CONTENTS System Description ........................4 Model Numbers ..........................4 Instructions for Continued Airworthiness ..................4 Periodic Inspections ........................4 Installation ............................4 Installation Procedures ......................5 Troubleshooting ........................5 Installation Options ........................6 Wiring Diagrams ..........................8 Wiring Diagram for Single AeroSun EVO IV ................8 Wiring Diagram for Dual AeroSun EVO IV ................
1 System Description The AeroSun EVO IV Series landing light is a rectangular shape LED to fit a variety of experimental and LSA platforms. It features integrated Pulse or “WigWag”, significantly increasing recognition in broad daylight as well as night operations to help avoid midair collisions and bird strikes while drawing half the current.
5.1 Installation Procedures This installation procedure is for single or multiple light installations (wiring diagrams provided). Pulse function is a self-contained feature and does not require use of external control circuitry. An additional wire and switch will be required to enable pulse mode, and for multiple lights an additional synchronization wire installation will be required.
5.3 Installation Options 5.3.1 Optional Mount (KIT-0012) Figure 1 5.3.2 Optional Mount Installation Figure 2 0100-0003 AeroSun EVO IV Installation Rev_D.docx Page 6 of 9...
Page 7
5.3.3 Panel Mount Installation Figure 3 0100-0003 AeroSun EVO IV Installation Rev_D.docx Page 7 of 9...
6 Wiring Diagrams Wiring Diagram for Single AeroSun EVO IV Figure 4 Fuse/breaker should be rated for wire size per AC43.13-1B Wiring Diagram for Dual AeroSun EVO IV Figure 5 Fuse/breaker should be rated for wire size per AC43.13-1B Note: If lights installed in close approximation, within two feet, then use AeroLEDs synch circuit (00-8120). 0100-0003 AeroSun EVO IV Installation Rev_D.docx Page 8 of 9...
Wiring Diagram for Four AeroSun EVO IV Figure 6 Fuse/breaker should be rated for wire size per AC43.13-1B 0100-0003 AeroSun EVO IV Installation Rev_D.docx Page 9 of 9...
Need help?
Do you have a question about the AEROLEDS AeroSun EVO IV Series and is the answer not in the manual?
Questions and answers