Table of Contents
Advertisement
22. The following screen appears.
NOTE:
Whenever you install a hard disk drive, you can use the default RAID mode (if one hard
disk drive only default is Single, if two hard disk drives it will be JBOD, all 4 hard drives
will be RAID 5). Or change the RAID mode by clicking CHANGE.
If you did not click REFRESH and CONFIGURE each time you insert a hard disk drive,
it will have the wrong RAID mode and the inserted disk might be invalid.
41
Advertisement
Table of Contents
Need help?
Do you have a question about the NAS04 - annexe 3 and is the answer not in the manual?