Download the soundcore app to adjust EQ settings, experience Gaming Mode, customize touch controls, update firmware, and explore more features.
If your earbuds cannot connect with the soundcore app, try re-installing the app or updating it to the latest version available in your mobile app store.
Download the app via http://dl-soundcore.soundcore.com/qcdl?flow=soundcore
OVERVIEW
1. Adjustable Ear Hook
2. Touch Area
3. Charging Contactors
4. Sound Outlet
5. LED Light Strip
6. USB-C Charging Port
7. Charging Case Button
POWERING ON & PAIRING
1. Open the charging case. The earbuds will automatically power on and enter Bluetooth pairing mode.
2. Select "soundcore AeroFit 2" on your device's Bluetooth list to connect. During pairing, the LED light strip on the
charging case will start flashing. Once the pairing is successful, the LED light strip will stay on for 1 second before
turning off.
Once connected, the earbuds will automatically reconnect to your device every time you open the charging case, as long as you haven't deleted the
pairing history from your device.
DUAL CONNECTIONS
To connect your earbuds with two Bluetooth devices at the same time, there are two methods:
Page 1
Download the soundcore app to adjust EQ settings, experience Gaming Mode, customize touch controls, update firmware, and explore more features. If your earbuds cannot connect with the soundcore app, try re-installing the app or updating it to the latest version available in your mobile app store.
If your earbuds have been connected to two devices, remove at least one before pairing with a new device. Method 2: Use the soundcore App In the soundcore app, tap Dual Connections on the main interface, then proceed to Connect New Device. Dual Connections feature is enabled by default.
1. Pick up the earbuds and slide the ear hooks all the way to the LV4 position, which offers the largest fit. 2. Rotate the ear hooks along your outer ear for proper positioning. 3. After putting on the earbuds, you can slide the ear hooks back and forth between four levels until you find the most comfortable and secure fit.
Page 4
In the soundcore app, the default sound effect is "soundcore Signature", a special preset recommended by the soundcore team. We offer 22 EQ presets for different scenarios, which you can switch based on your preferences. Additionally, you can create your own sound profile by adjusting eight sliders on the "Custom Equalizer" page.
To power off, return both earbuds to the charging case and close the case. The earbuds will automatically power off after 30 minutes if they are not connected. The duration can be customized in the soundcore app. RESET Reset the earbuds if they have issues pairing with each other or with other devices.
Checking the Charging Status When you connect the charging case to a power source, the LED light strip will display the charging status: FIRMWARE UPDATE You will be notified once a new firmware version is detected when the earbuds are connected to the app. Ensure the earbuds are in the charging case and the case remains open until the firmware update is complete.
Need help?
Do you have a question about the AeroFit 2 and is the answer not in the manual?
Questions and answers