Do you have a question about the Q20i and is the answer not in the manual?
Questions and answers
Renee Van Wyck
March 2, 2025
There isn't any sound
1 comments:
Mr. Anderson
May 14, 2025
There may be no sound from the Soundcore Q20i due to the following reasons:
1. Volume Levels: The device or headphones may be muted or the volume set too low. Check and adjust the volume on both the headphones and the connected device.
2. Playback Device Settings: The Bluetooth headphones may not be set as the default playback device. On a PC, right-click the speaker icon, open sound settings, and set the headphones as the default output.
3. Connection Issues: There may be a problem with the Bluetooth connection. Try disconnecting and reconnecting the headphones or restarting both the headphones and the connected device.
4. Reset Required: If problems persist, reset the headphones by deleting the pairing history and restarting the headphones.
5. AUX Mode: If using a wired connection via AUX, ensure the cable is properly connected and the device is outputting sound through the headphone jack.
Need help?
Do you have a question about the Q20i and is the answer not in the manual?
Questions and answers
There isn't any sound
There may be no sound from the Soundcore Q20i due to the following reasons:
1. Volume Levels: The device or headphones may be muted or the volume set too low. Check and adjust the volume on both the headphones and the connected device.
2. Playback Device Settings: The Bluetooth headphones may not be set as the default playback device. On a PC, right-click the speaker icon, open sound settings, and set the headphones as the default output.
3. Connection Issues: There may be a problem with the Bluetooth connection. Try disconnecting and reconnecting the headphones or restarting both the headphones and the connected device.
4. Reset Required: If problems persist, reset the headphones by deleting the pairing history and restarting the headphones.
5. AUX Mode: If using a wired connection via AUX, ensure the cable is properly connected and the device is outputting sound through the headphone jack.
This answer is automatically generated