Related Manuals for Soundcore AeroFit Pro
Summary of Contents for Soundcore AeroFit Pro
- Page 1 AeroFit Pro User Guide (A3871) OVERVIEW WEARING CHARGING POWERING ON & OFF PAIRING DUAL CONNECTIONS BUTTON CONTROLS LDAC FIRMWARE UPDATE RESET SPECS...
- Page 2 Download the soundcore app to experience Spatial Audio, adjust EQ settings, update firmware, and explore more. If your earbuds cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
- Page 3 WEARING Without Detachable Neckband (Daily Use): Pick up the earbuds from the charging case, then rotate the earhooks along the auricles of your ears to achieve proper positioning. With Detachable Neckband (During Workout): 1. Adjust the detachable neckband to an appropriate length.
- Page 4 2. Snap the earbuds onto the detachable neckband. Make sure the orientation is correct by aligning the marks on the earbuds and detachable neckband. 3. Put on the detachable neckband behind your neck, and position the earhooks on your ears.
-
Page 5: Powering On And Off
CHARGING Remember to tear off the insulation stickers on the earbuds before first use. 5 mins 1 hr 10 mins = 4 hrs 1. Place the earbuds in the charging case and close it. • Fully dry off the earbuds and the USB-C charging port before charging. Low Battery Indication Earbuds: You will hear a voice prompt of battery running low. - Page 6 To power off both earbuds, press and hold the button of the left or right earbud for 2 seconds. The earbuds will automatically power off after 30 minutes if they are not connected. The duration can be customized in the soundcore app. PAIRING...
-
Page 7: Manual Pairing
The earbuds will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore AeroFit Pro" on your device's Bluetooth list to connect. - Page 8 3. Select "soundcore AeroFit Pro" on your new device's Bluetooth list to connect. DUAL CONNECTIONS To connect the earbuds with two Bluetooth devices at the same time, open the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.
-
Page 9: Button Controls
BUTTON CONTROLS MONO ×2 ×2 ×1 ×2 ×1 ×1 ×1 TWS mode Mono mode Play / Pause Press twice (R) Press once Previous track Next track Press twice (L) Press twice Volume up Press once (R) Volume down Press once (L) Answer a call Press once (L/R) Hang up... - Page 10 LDAC Enable LDAC in the soundcore app for higher-quality audio. *Only available on devices powered by Android 8.0 or later.
-
Page 11: Firmware Update
FIRMWARE UPDATE You will be informed once a new firmware version is detected when you connect the earbuds to the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware update is complete. During the update, ensure the earbuds are being charged and avoid any usage. RESET ×3... - Page 12 Reset if the earbuds have issues pairing with each other or with other devices. Delete the pairing history from your Bluetooth device first. Place the earbuds in the charging case and leave the case open. Press the charging case button all the way down and hold for 10 seconds until the LED indicators on the charging case flash three times SPECS Specifications are subject to change without notice.
Need help?
Do you have a question about the AeroFit Pro and is the answer not in the manual?
Questions and answers