SMC Networks 8124PL2 - annexe 1 Management Manual page 51

Configuring the Switch
Menu
PoE
Power Status
Power Config
Power Port Status
Power Port Config
Address Table
Static Addresses
Dynamic Addresses
Address Aging
Spanning Tree
STA
Information
Configuration
Port Information
Trunk Information
Port Configuration
Trunk Configuration
VLAN
802.1Q VLAN
Basic Information
Current Table
Static List
Static Table
Static Membership by Port Configures membership type for interfaces, including tagged,
Port Configuration
Trunk Configuration
Private VLAN
Information
Configuration
3-6
Table 3-2 Main Menu (Continued)
Description
Displays the status of global power parameters
Configures the power budget for the switch
Displays the status of port power parameters
Configures port power parameters
Displays entries for interface, address or VLAN
Displays or edits static entries in the Address Table
Sets timeout for dynamically learned entries
Displays STA values used for the bridge
Configures global bridge settings for STA, and RSTP
Displays individual port settings for STA
Displays individual trunk settings for STA
Configures individual port settings for STA
Configures individual trunk settings for STA
Displays information on the VLAN type supported by this
switch
Shows the current port members of each VLAN and whether
or not the port is tagged or untagged
Used to create or remove VLAN groups
Modifies the settings for an existing VLAN
untagged or forbidden
Specifies default PVID and VLAN attributes
Specifies default trunk VID and VLAN attributes
Displays Private VLAN feature information
This page is used to create/remove primary or community
VLANs
Page
3-105
3-106
3-106
3-107
3-108
3-108
3-109
3-110
3-111
3-112
3-112
3-114
3-118
3-118
3-121
3-121
3-123
3-123
3-126
3-126
3-128
3-129
3-131
3-132
3-132
3-133
3-134
3-135