SMC Networks 7904WBRB2 - annexe 1 Manual page 83

key before saving settings. This is so you can configure your
wireless client with the correct key.
To manually configure the encryption key, enter five hexadecimal pairs of
digits for each 64-bit key, or enter 13 pairs for the single 128-bit key.
(A hexadecimal digit is a number or letter in the range 0-9 or A-F.)
Note that WEP protects data transmitted between wireless nodes, but
does not protect any transmissions over your wired network or over the
Internet.
Note: The passphrase can consist of up to 32 alphanumeric characters.
C
ONFIGURATION
P
ARAMETERS
4-39