SMC Networks 7904WBRB2 - annexe 1 Manual page 76

C
ONFIGURING THE
Parameter
IP Address Pool
Start IP Address Specify the start IP address of the DHCP pool. Do not include
End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here. Otherwise,
VLAN
VLANs are organized and controlled by VLAN Profiles. Up to 4 VLAN
profiles can be created. Once a VLAN profile is created, you should add
interfaces into the VLAN by changing the VLAN setting of that interface.
Please note that only those interfaces of IEEE 802 bridging type (ex. LAN
ports and 1483 Bridging PVCs) can be added to a VLAN.
4-32
ADSL R
OUTER
Description
the IP address of the Barricade in the client address pool. If you
change the pool range, make sure the first three octets match
the gateway's IP address, i.e., 192.168.2.xxx.
leave this field blank.