SMC Networks 7904WBRB2 - annexe 1 Manual page 133

Troubleshooting Chart
Symptom
Management Problems
Cannot connect
using the web
browser
Forgot or lost
the password
Action
• Be sure to have configured the Barricade with a
valid IP address, subnet mask, and default
gateway.
• Check that you have a valid network connection
to the Barricade and that the port you are using
has not been disabled.
• Check the network cabling between the
management station and the Barricade.
• Press the Reset button on the rear panel (holding
it down for at least five seconds) to restore the
factory defaults.
T
ROUBLESHOOTING
A-3