SMC Networks 7904WBRB2 - annexe 1 Manual page 36

C C
ONFIGURING
2. In the Command Prompt window, type "IPCONFIG /RELEASE"
and press ENTER.
3. Type "IPCONFIG /RENEW" and press the ENTER key. Verify that
your IP Address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1. These
values confirm that your Barricade is functioning.
4. Close the Command Prompt window.
Your computer is now configured to connect to the Barricade.
3-10
PC
LIENT