Removing And Refitting The Shelf Guides; Fitting The Sliding Runners - Whirlpool WOI98FPT2SBA Owner's Manual

ACCESSORIES
WIRE SHELF
Use to cook food or as a
support for pans, cake
tins and other ovenproof
items of cookware.
FOOD PROBE
To accurately measure
the core temperature
of food during cooking.
Thanks to its rigid
support, it can be used
for meat and fish, and
also for bread, cakes and
baked pastries.
The number and the type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately; for orders and information contact the after sales service.
* Available only in certain models
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across
the shelf guides, making sure that the side with the
raised edge is facing upwards.
Other accessories, such as the drip tray and the
baking tray, are inserted horizontally in the same way
as the wire shelf.

REMOVING AND REFITTING THE SHELF GUIDES

• To remove the shelf guides, remove the fixing screws
(if present) on both sides with the aid of a coin.
Lift the guides up and pull the lower parts out of their
seatings: the shelf guides can now be removed.
• To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, side them into
the cooking compartment, then lower them into
position in the lower seating.
L R
DRIP TRAY
Use as an oven tray
for cooking meat, fish,
vegetables, focaccia, etc.
or position underneath
the wire shelf to collect
cooking juices.
AIR FRY TRAY *
To be used when
cooking foods with Air
Fry function, with a
baking tray positioned
at a lower level to collect
possible crumbs and
drip. It can be cleaned in
the dishwasher.
The left ("L") and right ("R")
shelf guides can be recognized
by the logo indicated in this
picture.
BAKING TRAY *
Use for cooking all bread
and pastry products, but
also for roasts, fish en
papillotte, etc.

FITTING THE SLIDING RUNNERS

Please note: The sliding runners can be fitted on any level.
SLIDING RUNNERS *
To facilitate inserting or
removing accessories.
Remove the shelf guides
from the oven and remove
the protective plastic from
the sliding runners.
Fasten the upper clip of the
runner to the shelf guide
and slide it along as far as it
will go. Lower the other clip
into position.
To secure the guide, press
the lower portion of the clip
firmly against the shelf
guide. Make sure that the
runners can move freely.
Repeat these steps on the
other shelf guide on the
same level.