Baking Tray; Inserting The Wire Shelf And Other Accessories; Removing And Refitting The Shelf Guides - Whirlpool OAKZ9379HIX Daily Reference Manual

ACCESSORIES
WIRE SHELF
Use to cook food or as a
support for pans, cake tins
and other ovenproof items of
cookware
* Available only on certain models
The number and the type of accessories may vary depending on which model is purchased.
Other accessories can be purchased separately from the After-sales Service.
INSERTING THE WIRE SHELF AND OTHER
ACCESSORIES
Insert the wire shelf horizontally by sliding it across the
shelf guides, making sure that the side with the raised
edge is facing upwards.
Other accessories, such as the drip tray and the baking
tray, are inserted horizontally in the same way as the
wire shelf.

REMOVING AND REFITTING THE SHELF GUIDES

• To remove the shelf guides, lift the guides up and
then gently pull the lower part out of its seating: The
shelf guides can now be removed.
• To refit the shelf guides, first fit them back into their
upper seating. Keeping them held up, slide them
into the cooking compartment, then lower them into
position in the lower seating.
2

BAKING TRAY

Use for cooking all bread and
pastry products, but also for
roasts, fish en papillotte, etc.
DRIP TRAY *
Use as an oven tray for
cooking meat, fish,
vegetables, focaccia, etc. or
position underneath the wire
shelf to collect cooking juices.
FITTING THE SLIDING RUNNERS (IF PRESENT)
Remove the shelf guides from the oven and remove the
protective plastic from the sliding runners.
Fasten the upper clip of the runner to the shelf guide
and slide it along as far as it will go. Lower the other
clip into position. To secure the guide, press the lower
portion of the clip firmly against the shelf guide. Make
sure that the runners can move freely. Repeat these
steps on the other shelf guide on the same level.
Please note: The sliding runners can be fitted on any level.
SLIDING RUNNERS *
To facilitate inserting or
removing accessories.