Table of Contents
Advertisement
A
T
BOUT THE
IGER
Status LEDs
The LEDs, which are located on the front panel for easy viewing, are
shown below and described in the following table.
Figure 1-2. Port and System LEDs
LED
Fast Ethernet Ports (Ports 1~48)
Link/Act.*
Gigabit Ethernet Ports (Ports 49~50)
Link/Act.*
FDX*
(all ports)
*Use the Mode Select button to select the LED display mode.
1-6
S
10/100
WITCH
Port Status LEDs
Condition
On/Flashing
Amber
On/Flashing
Green
Off
On/Flashing
Amber
On/Flashing
Green
Off
On Green
Off
Port has established a valid 10 Mbps network
connection. Flashing indicates activity.
Port has established a valid 100 Mbps network
connection. Flashing indicates activity.
There is no valid link on the port.
Port has established a valid 10 Mbps or
100 Mbps network connection. Flashing
indicates activity.
Port has established a valid 1000 Mbps
network connection. Flashing indicates
activity.
There is no valid link on the port.
Port is operating in full-duplex mode.
Port is operating in half-duplex mode.
Status
Advertisement
Table of Contents
