Table of Contents
Advertisement
Bandwidth
The difference between the highest and lowest frequencies
available for network signals. Also synonymous with wire speed,
the actual speed of the data transmission along the cable.
Class I Repeater
Fast Ethernet repeater that is principally used to connect different
physical signaling systems (e.g., 100BASE-TX, 100BASE-FX) and
that has an internal delay such that only one repeater of this type
can reside within a single collision domain when maximum cable
lengths are used.
Class II Repeater
Fast Ethernet repeater that typically supports a single physical
signaling system (e.g., 100BASE-TX, or 100BASE-FX) and that has a
smaller internal delay so that two such repeaters can reside within
a single collision domain when maximum cable lengths are used.
Collision
A condition in which packets transmitted over the cable interfere
with each other. Their interference makes both signals
unintelligible.
Collision Domain
Single CSMA/CD LAN segment.
CSMA/CD
Carrier Sense Multiple Access/Collision Detect is the
communication method employed by Ethernet and Fast Ethernet.
End Station
A workstation, server, or other device that does not act as a
network interconnection.
Glossary-2
Advertisement
Table of Contents
