Subscribe to Our Youtube Channel
Related Manuals for CP Plus CarKam CP-F83B
Summary of Contents for CP Plus CarKam CP-F83B
- Page 1 CarKam CP-F83B (2CH) CarKam 4K Front & Rear Quick Installation Guide Version 1.0.1...
- Page 2 About the Quick Installation Guide This document serves as the manual for the CarKam 4K Front & Rear. Before using this product, we strongly advise that you read through this document carefully to ensure proper usage. a) This document provides instructions on how to use the product, with a focus on its default settings for quick reference.
-
Page 3: Table Of Contents
Table of Contents Overview of the CarKam 4K Front & Rear ................ 4 Key Functions ........................5 Indicator Light ........................5 Installation process......................6 4.1. SD Card Installation ....................6 4.2. Install electrostatic stickers ..................7 4.3. Mounting the Dashcam .................... 8 4.4. -
Page 4: Overview Of The Carkam 4K Front & Rear
Overview of the CarKam 4K Front & Rear Figure No. 1 Note: As this product is subject to active development, some functions may differ from those presented in this manual. Please refer to the actual product for accurate information. a) Touch Screen b) Bracket Adhesive c) Power d) Camera Lens... -
Page 5: Key Functions
Key Functions The CarKam 4K Front & Rear has only one key, the power key. Various functions can be accessed by pressing the power key, a specific number of times for each function. Action Function Power Button Press and hold for 3 sec Shut down Short press screen saver/turn on the screen... -
Page 6: Installation Process
Installation process. 4.1. SD Card Installation Insert the SD card into the slot with the contact side facing up, Ensure the SD card is fully installed until you hear a (click) sound Figure No. 2 Note: After inserting a compatible microSD card, the CarKam 4K Front & Rear automatically enters the recording mode each time it is turned on. -
Page 7: Install Electrostatic Stickers
4.2. Install electrostatic stickers Position the electrostatic sticker within the dotted area on the windshield, avoiding the edges. Choose a clean spot on the glass. Clean the surface thoroughly before applying the sticker and press out any bubbles for a smooth finish. Tear off the large electrostatic sticker and stick it on the front windshield at a suitable place. -
Page 8: Mounting The Dashcam
4.3. Mounting the Dashcam Peel off the protective tape from the high-temperature adhesive on the base of the bracket. Place the recorder into the designated area outlined by the dotted frame on the electrostatic sticker. Tear off the 3M tape, stick the device on the electrostatic sticker, and adjust the device angle Figure No. -
Page 9: Connect Power Cable
4.4. Connect Power Cable Connect the USB Power cable to Front Dashcam and embed it properly. Figure No. 5... -
Page 10: Use The Pry Tool To Fix The Cable
4.5. Use the Pry Tool to fix the cable Please use a pry tool to conceal the power line under the roof upholstery and seal the rubber ring along the A-pillar. Note: Depending on the vehicle’s style, the location of the car charger may vary. The figure above is for reference purposes only. -
Page 11: Connect Car Charger To Vehicle
4.6. Connect Car Charger to vehicle As shown in the figure, Connect the car charger and insert the power cable into the car charger. Power On/Off Method The CarKam 4K Front & Rear supports the following methods for powering on & off: When the vehicle car charger is plugged in and the vehicle is started, the charger will draw power from the car, automatically activating the CarKam 4K Front &... -
Page 12: Adopter And Rear Camera Connection
4.7. Adopter and Rear camera connection Please connect the adapter cable and Rear camera Cable to the front Dashcam. Figure No. 8 4.8. Embed the cables Please use a pry tool to conceal the cable under the roof upholstery properly. Figure No. -
Page 13: Electrostatic Sticker Installation
4.9. Electrostatic sticker installation. Tear off the small electrostatic sticker and stick it in the middle of the rear windshield to install the rear camera. Figure No. 10 Note-: 1. Install the front camera at the top of the front windshield. 2. -
Page 14: Electrostatic Sticker And Rear Cam Installation
4.10. Electrostatic sticker and Rear cam installation Tear off the 3M tape of the rear camera, stick the rear camera on the small electrostatic sticker, and adjust the device angle. Figure No. 11 Figure No. 12... -
Page 15: Quick Add Carkam 4K Front & Rear On Mobile App
Note: The CarKam 4K Front & Rear will also shut down in such operations. • If the CarKam 4K Front & Rear is operated in an environment that exceeds the specified temperature range, it will automatically shut down. • If you remove the SD card during the operation of the CarKam 4K Front & Rear, the device will automatically shut down. - Page 16 Thank you for Choosing CP Plus! Toll Free Number 8800952952 Website: - www.cpplusworld.com Email id: - sales@cpplusworld.com; carkamsupport@cpplusworld.com...
Need help?
Do you have a question about the CarKam CP-F83B and is the answer not in the manual?
Questions and answers