Summary of Contents for CP Plus CarKam GPS CP-AD-H2B-PW
Page 1
Quick Start Guide CarKam GPS Model No: CP-AD-H2B-PW...
Page 2
About the Quick Start Guide This document serves as the user manual for CarKam GPS. Prior to utilizing this product, we strongly advise carefully reading through this document to ensure proper usage. This document provides instructions on how to use the product, focusing on its default settings, for quick reference.
1. Overview of the Carkam GPS ① ② ⑥ ⑤ ③ ④ ⑦ ⑧ Note: As this product is subject to active development, some functions may differ from those presented in this manual. Please refer to the actual product for accurate information. ①...
1.1 Key Functions The CarKam GPS has only one key, the power key. Various functions can be accessed by pressing the power key a specific number of times for each function. Action Function Press once Turn on Press three times in a row Format memory card Press five times in a row Reset factory settings...
recording mode each time it is turned on. A Green dot blinks to indicate that the video recording is in progress. 2. Installation process. 2.1 SD Card Insert the SD card into the slot with the contact side facing up, Ensure the SD card is fully installed until you hear a (click) sound 2.2 Electrostatic sticker Position the electrostatic sticker within the dotted area on the windshield, avoiding the...
Place the recorder into the designated area outlined by the dotted frame on the electrostatic sticker. 2.4 Cable and connect the power supply. As shown in the figure, arrange the power supply line along the top of the windshield, the A-pillar, and the passenger storage box.
Note: Depending on the vehicle style, the location of the car charger may vary. The figure above is for reference purposes only. 2.5 Power On/Off CarKam GPS The CarKam GPS supports the following methods for powering on & off: When the vehicle car charger is plugged in and the vehicle is started, the charger will draw power from the vehicle, automatically activating the Carkam GPS.
• Please check the CPPLUS MAC address, like CPPLUS-XXXX, where each device has a unique SSID based on its MAC address, using the last four digits. • Please refer to the label pasted on the back of the device to find the password for connecting to the hotspot.
• SD card abnormality. • Format SD card process. • Recorder factory reset process. • Playback mode (View recorder album on APP) • Receive the upgrade package process. When returning to the main interface of the recorder, or exiting the above process, the recorder will automatically turn on to record video 5.2 Emergency video Recording Duration: Upon triggering emergency video recording, the CarKam continues...
File type File name File naming rules Normal video Normal NOYYYYMMDD-HHMMSS-XXXXXX.mp4 Emergency video Event EVYYYYMMDD-HHMMSS-XXXXXX.mp4 Parking video Normal PAYYYYMMDD-HHMMSS-XXXXXX.mp4 Snapshot Photo PHYYYYMMDD-HHMMSS-XXXXXX.jpg Time Lapse Lapse LAYYYYMMDD-HHMMSS-XXXXXX.mp4 6. Points to Note: The CarKam is a driving assistance product intended for recording the external status of the vehicle.
replace the memory card with a new one. The company bears no responsibility for video-saving difficulties caused by memory card problems. Avoid placing this product near strong magnetic fields, as they may cause damage to the device. Do not use this product in environments exceeding 60°C or below -10°C. Please use this product in compliance with applicable laws.
Page 13
Thank You for Choosing CPPlus! Support number 8800952952 Website: - www.cpplusworld.com Email id: - sales@cpplusworld.com; carkamsupport@cpplusworld.com...
Need help?
Do you have a question about the CarKam GPS CP-AD-H2B-PW and is the answer not in the manual?
Questions and answers