Safety Instructions - SMC Networks 2622W-P User Manual

CE Marking Warning
This is a Class B product. In a domestic environment this
product may cause radio interference in which case the user may
be required to take adequate measures.

Safety Instructions

For your own safety, and to protect your Print Server, please
observe the following safety advice.
1. Unplug this device from its power source before cleaning. Use
only a slightly dampened cloth for cleaning. Do not use liquid
or aerosol cleaners.
2. Avoid using this product near water. Exposure to water poses
an electric-shock hazard.
3. Do not place the Print Server on an unstable surface. The
device may fall causing serious damage to the device.
4. This device should only be used with the power supply type
specified on the marking label. If you are not sure of type of
your local power supply, consult your dealer or the local
power company.
5. Do not pinch, crimp or otherwise damage the power cord. If
exposed to foot traffic, ensures that the cable is properly
shielded and does not pose a tripping hazard.
6. If using an extension cord, makes sure the total ampere rating
of the products using the cord does not exceed the extension
cord's ampere rating.
7. Do not attempt to service this device, as opening or removing
casing may expose you to dangerous voltage points or other
risks. Refer all servicing to qualified service personnel.
8. The Print Server should be serviced by qualified service
personnel under the following conditions:
• The power cord is damaged or frayed.
• Liquid has been spilled onto the product.
73