Table of Contents
Advertisement
Wireless Configuration
Models SMC2622W-P and SMC2622W-U
The SMC2622W-P and SMC2622W-U are Wireless stations, not
access points. Like all other Wireless stations, they have 3
modes:
• 802.11 Ad Hoc mode - no Access Point is used, Wireless
stations communicate directly with each other. This is the
current standard.
• Ad Hoc mode - no Access Point is used, Wireless stations
communicate directly with each other. This is the older
standard.
NOTE: Of the two (2) Ad-hoc modes, "802.11 Ad Hoc" mode is
recommended. If your Wireless LAN Card doesn't provide
"802.11 Ad Hoc" mode, try "Ad Hoc" mode on the PC and
"802.11 Ad Hoc" on the SMC2622W-P/SMC2622W-U. If this
fails, select"Ad-hoc" mode on the Print Server.
Infrastructure (Default) - all Wireless stations connect to the
Access Point. This allows connection to both other Wireless
stations and the wired LAN.
NOTE: The SMC2622W-P and SMC2622W-U do NOT allow both a
LAN connection and "Infrastructure" mode.
In "Infrastructure" mode, connecting a LAN cable will
disable the Wireless interface.
To use the LAN interface, "Ad-hoc" mode must be used.
12
Advertisement
Table of Contents
