Windows Peer-To-Peer Print Driver - SMC Networks 2622W-P User Manual

The top line in the list (NetBEUI -> PCI Fast Ethernet Adapter)
indicates that the NetBEUI protocol is installed on this PC. Your
PC will show the name of the your Network card rather than "PCI
Fast Ethernet Adapter".
The highlighted line (TCP/IP -> PCI Fast Ethernet Adapter)
indicates that TCP/IP is installed. Your PC will show the name of
your Network card rather than "PCI Fast Ethernet Adapter".
2. If neither line is present:
• Install the NetBEUI protocol by selecting Add - Protocol -
Microsoft - NetBEUI - OK. You may be prompted for your
Windows CD-ROM.
• If required, you can also install TCP/IP. However, depending
on your LAN environment, TCP/IP may require further
configuration.
3. If either protocol is already installed, proceed with
installation.

Windows Peer-to-peer Print Driver

With this printing method, print jobs are stored (queued) on
your PC, and then sent to the Print Server when it is available.
Setup
Before performing the following procedure, the Print Server must
be installed on your LAN, and configured as described in "Print
Server Configuration". Both the Print Server and the attached
printer should be powered ON.
1. Insert the supplied CD-ROM into your drive. If the setup
program does not start automatically, run SETUP in the root
folder.
2. Select the Installation icon, then choose the User option in
the "Setup Type" screen. This will install the Peer-to-peer
Print Driver.
20