Led Indicators; Diagnostic Push Button - SMC Networks 2622W-P User Manual

LED Indicators

On the Print Servers two LED indicators can be found on the
top. The "Error" LED is orange or red. The "Status" indicator LED
is green. The LED indicator modes are described in the following
table.
Status
Solid Off
Solid On
Solid On
Blinking
The LED indicators on the SMC2622W-P and SMC2622W-U
describe the following:
LED
WLAN Act
LAN Act

Diagnostic Push Button

The Print Servers are fitted with a Diagnostic Push Button. The
button is recessed; a pin or paper clip can be used to press it.
This button has 2 functions:
• Restore the factory default settings
• Print a test page containing all current settings
To restore the factory default settings:
1. Turn the Print Server OFF.
Error Description
Solid Off No powers
Solid On Hardware Error
Solid Off Normal operation (Idle)
Blinking Firmware upgrade in progress
(the two LED blink in sequence)
Description
Off - Idle
Flashing - Transmitting or receiving data through Wireless LAN
Off - Idle
Flashing - Transmitting or receiving dtat through the LAN.
6