Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Winegard WG-2250
Summary of Contents for Winegard WG-2250
- Page 1 Cargo Tray INSTALLATION MANUAL Models – WG-2250, WG-3450, WG-SL50...
- Page 2 Thank you for purchasing the Winegard Cargo Tray. Please read these instructions complete before attempting assembly. Contents Tray Slide Mounts Slide Rails 1/4” Hardware (12) #10 Hardware (8) Mounting Screws (12) Braces Tools needed: tape measure, 7/16” and 3/8” socket wrench, drill with standard #2 Phillips head bit, and framing square.
- Page 3 Placement When determining placement of the cargo tray be aware of the following: • The space has sufficient room for the size of tray being installed. • The mounting surface is strong enough to support the tray when fully loaded. •...
- Page 4 Slide Mount Installation Step 1 – Decide on the desired height the tray will be mounted. This will determine the brace location. If there are any potential obstructions for the tray to slide, you’ll want to make sure to choose a height that can clear the obstruction. Brace Hole # Height...
- Page 5 Slide Mount Installation (cont.) Step 3 – Determine left and right slide assembly, proper orientation has the latch handles pointing up, as shown. Using the 1/4” hardware, attach slide rails to the slide mounts at the chosen height from step 1. Start by extending the slide rails fully.
- Page 6 Slide Mount Installation (cont.) Step 4 – Next, place the mount in its intended location. Make sure the mount is located so as not to interfere with any nearby object and is set back from the opening to accommodate the tray latches.
-
Page 7: Tray Installation
Tray Installation Step 5 – Fully extend slides rails. Position the tray between the two slides with the Winegard logo facing towards the front. Use the #10 hardware to loosely attach the tray to the slides, as shown. With the provided Allen wrench and a 7/16” socket wrench loosely fasten locations #1-6, as shown below. -
Page 8: Notes On Operation
Notes on Operation • Lifting up on the latches will disengage the locking mechanism allowing the tray to slide in and out. • Verify tray is secured when fully closed. • The tray will lock in place when fully extended, use latches to disengage locks and close the tray.
Need help?
Do you have a question about the WG-2250 and is the answer not in the manual?
Questions and answers