1. Manuals
  2. Brands
  3. Sanwa Manuals
  4. Remote Control
  5. EXZES Z III
  6. Manual

Sanwa EXZES Z III Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MANUAL
https:www.sanwa-denshi.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EXZES Z III and is the answer not in the manual?

Questions and answers

Mike Manning
June 6, 2025

How can I get an ELCERAM speedo to work with the radio.

0

Related Manuals for Sanwa EXZES Z III

Summary of Contents for Sanwa EXZES Z III

  • Page 1 MANUAL https:www.sanwa-denshi.com...
  • Page 2 When dangerous. the interior is dry, please submit it to the Sanwa Service for inspection even if it performs normally. ● The receiver is a precise instrument. Please do not cause a strong impact or vibration.

  • Page 3: Daily Care

    About Handling Transmitter Careful When Driving Caution Caution When operating RC car etc., be sure to observe the ● Please do not hit, drop or cause strong shocks. following and be careful not to disturb other people: In addition, if you touch the transmitter, receiver, servo, FET speed controller, etc.
  • Page 4 Safe Handling of Radio and Precautions Note Precautions for Safe Use Warning ● 2.4GHz frequency band is not only used for radio control. This frequency band is shared with ISM (Industrial, Scientific and Medical) band. In urban areas, it can be affected by microwave oven, wireless LAN, digital cordless telephone, audio equipment, Bluetooth of game machine or cell phones, and short- range communication such as VICS.
  • Page 5 INDEX ■ Structure and Standard of Set・・・・・・・・・・・・・・・・・・6 ■ Before Using・・・・・・・・・・・・・・・・・・・・・・・・7 ■ About Connection and Loading of Receiver・・・・・・・・8、9 ■ Name of Various Parts of Transmitter・・・・・・・・・・・10、11 ■ How to use each feature・・・・・・・・・・・・・・・・・・・・12 ● OPERATION OF TOUCH PAD (12) ● TELEMETRY (52 - 64) ●...
  • Page 6 Structure and Standard of Set Structure of Set PC, primary components <Ａ>T r a n s m i t t e r EXZES ZIII <Ｂ>R e c e i v e r RX-493i <Ｃ>S e r v o Li -Po battery for transmitter (LP1 – 2500) x 1 BIND plug x 1 Dust cover for receiver x 1 <Ｄ>Accessories...

  • Page 7: Before Using

    Battery Access cover About Micro SD Card EXZES ZIII is compatible with micro SD card. Use Sanwa genuine or card formated to FAT32. Model ● data or telemetry data can be stored by the use of micro SD card. Firmware update becomes possible by the use of micro SD card when the firmware update of EXZES ZIII is published.
  • Page 8 About Connection and Loading of Receiver About Receiver BIND/SSL port Note) Connect only BIND plug, receiver battery and State of receiver LED compatible devices to BIND / SSL port. State of receiving electromagnetic waves Blue light on CH4：4ch State of not bei n g abl e to recei v e el e ctromagneti c waves CH3：3ch Blue light blinking During BIND (bind) setting...

  • Page 9: About Connection

    SSL - port set by CODE1 of AUX2 can be directly changed from the transmitter. PGS servo not specified by CODE1 of AUX2 works on the parameters saved inside. Refer to company HP for connection examples other than those given above. http://www.sanwa-denshi.com ※...
  • Page 10 Name of Various Parts of Transmitter Trim Lever Trim Lever Trim Lever Push Swtch Push Swtch Push Swtch Dial Function LED Generally, lights as per Antenna in-built area setting of LED. The light Strap Hook turns off or linking while various functions work as battery or telemetry alert Steering Stick...

  • Page 11: Battery Cover

    Servo port Micro SD slot Micro SD access cover Trim Lever Trim Lever Battery Cover Battery access cover Back to INDEX...
  • Page 12 How to use each feature Operation of TouchPad ●Setting, calling can be easily done by the gesture operation of touchpad. Gesture operation Name Operation Enter area ● Perform enter operation by touching such that enter area is lightly tapped by the fingertip. ●...

  • Page 13: Display Panel

    How to use each feature Display Panel ● Each of the functions of EXZES ZIII can be directly selected by touchpad operation. ● Functions of each channel can be separately set. ● Upon switching the power switch ON, top screen appears after boot screen display (when the setting of the boot is DEMO).

  • Page 14: Menu Structure

    How to use each feature Menu Structure ●Setting of functions, calling of model memory can be easily done by using respective keys. ●Menu consists of a menu of setting, AUX, model, timer, telemetry, system and it contains functions relating to respective menus. TELEMETRY CUSTOM CUSTOM...

  • Page 15: Model Select

    How to use each feature Launcher ● EXZES ZIII is provided with a function of starting launcher (shortcut menu) by performing key operation simultaneously at the time of operating power switch. Launcher function starts upon switching ON the power switch while pressing [SW 2]. The launcher is provided with [Model Select] and [RX Mode].

  • Page 16: Dual Rate[D/R]

    How to use each feature Dual Rate[D/R] SETTING ● You can adjust steering angle when operating the steering stick and throttle sctik to their peak. To correspond to the RC car or road condition, adjust the steering angle as you operate. ※...

  • Page 17: Steering Speed

    How to use each feature SPEED SETTING ● Feature to control the speed of the servos used for steering/ throttle. By setting, the RC car is not affected even when doing sudden operation. Smooth cornering is possible at the steering side for stable exist from the corner and by smooth throttle work which save power at the throttle side.

  • Page 18: Throttle Speed

    How to use each feature SPEED SETTING Throttle Speed ● Feature to slow down the throttle servo performance speed and delay the response of the speed controller against the throttle operation. The speed at the time of turning the throttle (Forward) and the speed at the time of returning the throttle (return) can be set individually.
  • Page 19 How to use each feature SPEED SETTING AUX1/AUX2 ・ Speed[AUX-SPEED] ● Function that slows down sped of the servo with respect to the operation of AUX1 / AUX2. Speed of forward and return can be separately set. Speed function does not work in slow operation according to the setting.
  • Page 20 How to use each feature CURVE SETTING ● Function of making operation volume of servo variable with respect to the operation of the steering wheel, throttle trigger, AUX. It responds quickly when the set value is on plus (+) side whereas it responds mildly when the set value is on minus (-) side.

  • Page 21: Steering Exponential [St-Exp]

    How to use each feature Steering Exponential [ST-EXP] ● Steering characteristics can vary from Mild ⇔ Linear ⇔ Quick. Generally, when the RC car senses the over-steer, the setting value is set to minus side, and when the RC car senses the under-steer, the numerical value is set to plus.
  • Page 22 How to use each feature CURVE SETTING AUX1/ Exponential [AUX1-EXP] ● You can change the operation feature of AUX1 from Mild ⇔ Linear ⇔ Quick. You can set the High side and the Low side separately ※ When setting AUX1 to [CODE10] AUX TYPE, changing the setting does not affect the performance. 1)Select [CURVE] by touchpad and decide by enter operation Select AUX1 with the Select button and set CURVE TYPE of AUX1 to [EXP] with the touch pad.
  • Page 23 How to use each feature Steering Adjustable Rate Control [ST-ARC] ● You can change the steering feature from Mild to Linear and to Quick. In general, if you find your RC car oversteering, change the setting to the minus side and if you find understeering, change to the plus side.
  • Page 24 How to use each feature CURVE SETTING AUX1 Adjustable Rate Control [AUX1-ARC] ● You can change the AUX1 performance feature from Mild to Linear and to Quick. You can set the High side and low side separately. ※ When setting AUX1 to "CODE10" in AUX TYPE, changing the setting does not affect the performance. 1)Select [CURVE] by touchpad and decide by enter operation.
  • Page 25 How to use each feature CRV, Point Curve [ST / TH / AUX1 / AUX2 - CRV] ● Function of setting 9 points from controller such as steering, throttle, AUX to full throttle and making the operation variable by adjusting the set value for each point. For throttle, high side (H) / brake side (B) can be set separately.

  • Page 26: Fail Safe [F/S]

    How to use each feature Fail Safe [F/S] SETTING ● Fail Safe Operation is a feature to keep the servo in a predetermined position for each channel in the event that the receiver cannot receive a power from the transmitter. A feature to keep the servos in a predetermined position for the servo of the throttle channel F/S setting (2ch) in the event that the battery voltage on the receiver side of...

  • Page 27: End Point Adjustment[Epa]

    How to use each feature BASE SETTING ● Base [BASE] contains basic features such as Reverse that determines the direction of the servo of each channel and the speed controller according to a specific RC car, the Sub Trim that adjusts the neutral position and the End Point Adjustment [EPA] that sets the operating range into one feature (Base) to allow you to make a setting all at once.
  • Page 28 How to use each feature AUX1 End Point Adjustment ● You can use AUX1 for functions of accessories and adjust the maximum steering angle (operating range) with EPA. Since you can set H (High) /L (Low) separately, the precise adjustment is possible. ※...
  • Page 29 How to use each feature BASE Reverse[REV] ● This is used when the operation and the movement of the servo are reversed for Steering / Throttle / AUX 1 / AUX 2. 1) Select [BASE] with the touch pad and select a channel to set (ST / TH / AUX 1 / AUX 2) by the select operation.

  • Page 30: Initial Value

    How to use each feature TRIM SETTING ● Trim can adjust the trim of each channel and set the trim action (centre/parallel). TRIM ● Use the trim to correct the neutral (centre) of each channel (ST / TH / AUX 1 / AUX 2). ●...
  • Page 31 How to use each feature TRIM TYPE ● The trim operation of each channel can be set to centre trim (CENT) and parallel trim (PARA). ● In the initial setting, steering is set to Trim 1 (TRM 1), and the throttle is set to Trim 2 (TRM 2). 1)Select [TRIM] by touchpad and define by enter operation Select the channel (ST / TH / AUX 1 / AUX) to be set with the SELECT operation.
  • Page 32 How to use each feature CONVERT ● It converts the trim adjusted for each channel to sub trim and EPA and corrects trim to centre. Depending on the setting, the conversion may not be possible. 1)Select [TRIM] by touchpad and define by enter operation. Channel selection by select operation Select the channel (ST / TH / AUX 1 / AUX 2) to convert by the select operation.
  • Page 33 How to use each feature SETTING FEELING ● The Feeling function allows you to adjust the Response Time of the Steering and Throttle channels to fine-tune the sensitivity of these controls. Channel selection by select operation 1) Select [FEELING] with the touchpad and confirm with the enter operation.
  • Page 34 How to use each feature ANTI-LOCK BRAKE [ALB] SETTING ● Anti-lock brakes make it possible to achieve stable braking on a low grip surface. ● Since the braking is stable, you can trace the cornering line as desired. 1)Select [ALB] by touchpad and define by enter operation. ※...
  • Page 35 How to use each feature OFFSET SETTING ● The Throttle Offset function allows you to temporarily shift the Neutral Point of the Throttle to help in GP car’s engine start up. ● The Neutral Point of the Throttle can be raised so that the engine does not stop during refueling of the car.
  • Page 36 How to use each feature ● AUX is a function to set the operation of AUX 1, AUX 2 (3 ch, 4 ch). You can choose from STEP AUX (STEP), POINT AUX (POINT), 4WS (4 wheel steering: same phase, opposite phase), MOA (Front and rear drive), Brake mixing (BR-MIX), Dual Steering (Dual STEERING) and CODE AUX (CODE10).
  • Page 37 How to use each feature 4 Wheel steering (4 wheel steering: same phase/opposite phase [4 WS] ● The operation of 4 wheel steering (4 wheel steering) is controlled by the operation of the assigned trim and switch. 1)Select [AUX] with touch pad and confirm with enter operation.
  • Page 38 How to use each feature MOTOR ON AXLE [MOA] (Front and rear drive) ● By setting motor on the axle (MOA), front rear drive ratio can be adjusted with front and rear 2 motor specification body. 1)Select [AUX] with the touchpad and confirm with the enter CUSTOM TELEMETRY operation.
  • Page 39 How to use each feature Dual Steering [DUAL STEERING] AUX [AUX] ● Operation volume of left and right can be separately adjusted by loading 2 steering servos. ● Smooth cornering can be realised by adjustment of Ackerman function. 1)Select [AUX] by touchpad and define by enter operation. 2)Setting of dual steering (DUAL ST) CUSTOM TELEMETRY...
  • Page 40 How to use each feature Boat [BOAT] AUX [AUX] ● Function of mixing from throttle to flap by setting boat AUX. 1)Select [AUX] by touchpad and define by enter operation. 2)Setting of the boat (BOAT) Decide the function to be operated by select operation and CUSTOM TELEMETRY set operation volume and mixing volume by the touchpad.
  • Page 41 How to use each feature CODE AUX ● The Code AUX function is used with SSL-compatible accessories, such as a Super Vortex Gen 2 and SV-D2 series ESC, PGS series Servos, and SGS-02 Gyros, whose Programming Parameters can be changed directly via the transmitter. ※...
  • Page 42 How to use each feature CODE AUX MIXING ● Mixing between channels and mixing with a single channel is possible. ● Other than C-MIX 1 ~ 5, it includes tank (TANK), limiter function. C-MIX1 ～ 5(compensation mixing1 ～ 5) Mixing [MIXING] ●...
  • Page 43 How to use each feature 1)Select <C-MIX1 ～ C-MIX5> of C-MIX by touchpad. TELEMETRY CUSTOM 2) Setting of the master (MASTER) SETTING MODEL Select the function of setting to master by touchpad. BIND 　○ Setting range　 ST、ST#1、ST#2、TH、TH#1、 SYSTEM MIXING TH#2、A1、A1#1、A1#2、A2#2 TIMER M.S.GEAR 3)Setting of a slave (SLAVE)
  • Page 44 How to use each feature Tank [TANK] Mixing [MIXING] ● Function of operating infinite railroad track installed with caterpillar for tanks by setting TANK (tank). Sway turning, and super sway turning is possible by steering/throttle operation based on mixing steering and throttle channel.
  • Page 45 How to use each feature Limiter [Limit] Mixing [MIXING] ● Function of setting a limit (position above which operation is not performed) in servo operation. Used if servo operation volume exceeds due to duplication of mixing or for preventing damage to the linkage. 1)Select <...
  • Page 46 How to use each feature TIMER ● Three timer functions of lap timer, interval timer, down timer are provided. ● Select timer and operate the select button then it will switch between the timer screen and the setting screen. ※ The function LED blinks during timer operation. Function LED CUSTOM TELEMETRY...
  • Page 47 How to use each feature SETUP TIMER ● Set various timers in the setup menu. 　 1)GOAL TIME SETTING [GOAL-TIME] 　The alarm will be activated by setting the goal time. TELEMETRY CUSTOM 　 SETTING MODEL 　○ Setting Range　00：00 ～ 99：59　(00：01 unit) 　○...

  • Page 48: Lap Timer

    How to use each feature LAP TIMER TIMER ● Each lap can be measured and recorded up to 999 laps. (Common to models) ● The pre-alarm (PRE-ALM) is loaded and the alarm rings automatically before the goal. 1)Select [TIMER] with the touchpad and confirm with ENTER operation.
  • Page 49 How to use each feature Interval timer 1/2 [INT TIMER 1/2] TIMER ● Activate the alarm at the time set during driving, and use it as a guide for the target time. ● There are 2 systems in interval timer namely INT1 and INT2 and these can be operated simultaneously. 1)Select [TIMER] with the touchpad and confirm with enter.

  • Page 50: Down Timer

    How to use each feature DOWN TIMER TIMER ● It is a measure of the fuel efficiency in the running time of the electric RC car and the engine RC car. ● 0.01-second units until 99: 59 can be set. ●...

  • Page 51: Start Time

    How to use each feature Racing Mode Function [R-MODE FUNCTION] TIMER ● Do setting of R-MODE linked by timer by racing mode function. １)Setting of MODE (Mode) CUSTOM TELEMETRY Link with timer and change setting of R-MODE (racing mode). SETTING MODEL 　〇...
  • Page 52 How to use each feature TELEMETRY ● Menu for setting LOG DATA, TELEMETRY SETTING, GRAPH SETTING, TELEMETRY SWITCH, TELEMETRY MIXING, RX MODE associated with telemetry. ● For using telemetry function, it can be made compatible by using a compatible receiver, sensor, PGS servo, SUPER VORTEX series, SV-PLUS series.
  • Page 53 How to use each feature LOG DATA TELEMETRY LOG DATA ● It is a function to manage log data such as reading logged data, graphing it, saving it to micro SD card, erasing log data and so on. 1)Select [TELEMETRY] with the touchpad and confirm with enter. 2)Select [LOG DATA] and confirm with enter.

  • Page 54: View Data

    How to use each feature VIEW DATA TELEMETRY ● It is a menu to read recorded log data and graph it. 1)Select [LOG DATA] with the touchpad and confirm with enter. 2)Select the log data to graph and confirm with enter operation. 3)When log data is selected, a menu will be displayed, so [VIEW DATA] is selected, the log data will be graphed and displayed.
  • Page 55 How to use each feature DATA NAME TELEMETRY ● This function changes the file name of the selected log data. ● The alphabet and symbols can be used in the file names. 　　 241125189152 1)Select [LOG DATA] with the touchpad and determine with Enter 241125189656 2)Select the log data to change the file name determine with Enter.
  • Page 56 How to use each feature EXPORT 〔.CSV〕 TELEMETRY ● This function converts the selected log data so that it can be graphed with spreadsheet software etc. of PC (personal computer). ● To use the export function, a micro SD card is required. 1)Select the touch pad [LOG DATA] and confirm with enter.
  • Page 57 How to use each feature PROTECT TELEMETRY ● It protects (protects) log data so that it is not deleted by mistake. 1)Select [LOG DATA] with the touchpad and confirm with enter. 2)Select the log data to protected and confirm with enter operation. 241125189152 ※...
  • Page 58 How to use each feature DELETE TELEMETRY 　 ● This function deletes log data. ● Protected log data cannot be deleted. 241125189152 1)Select [LOG DATA] with the touchpad and confirm with enter. 241125189656 241125189593 2)Select the log data to delete and confirm with enter operation. 241125189564 A confirmation screen will be displayed, so please operate according to the screen display.
  • Page 59 How to use each feature TELEMETRY SETTING TELEMETRY ● Set each function of telemetry. Select the function which is to be set with the select operation. ・SETTING TL1/TL2: TELEMETRY SETTING as temprature and speed [NAME] can be changed up to 3 characters. [UNIT] Switching of temperature settings and speed display (℃...
  • Page 60 How to use each feature Indicater TELEMETRY ● EXZES ZIII can check signal receiving conditions to use with RX- 493i or RX-492i. The conditions can be used for devices glitch and CUSTOM SETTING TELEMETRY TELEMETRY checking receiver place on the car. SETTING MODEL BIND...

  • Page 61: Graph Setting

    How to use each feature GRAPH SETTING TELEMETRY ● It is a function to select 3 items to display a graph when telemetry data is displayed in the graph. 1)Select [Telemetry] with the touchpad and enter with enter. 2)GRAPH SETTING Select [GRAPH SETTING] with the touchpad and confirm with enter.
  • Page 62 How to use each feature TELEMETRY MIXING TELEMETRY ● Telemetry data and data obtained from the sensor can be mixed into each channel. ● The master channel can be selected from TLM 1/2 (telemetry data 1/2), VOLT (voltage), RPM (frequency) data. ●...
  • Page 63 How to use each feature RX MODE SETTING TELEMETRY ● By setting RX MODE SETTING (and BIND setting), the EXZES ZIII transmitter can be used as a telemetry logger to monitor the operation and telemetry data from another compatible transmitter (EXZES ZIII/M17/ EXZES ZIII/MT-5/MT-R).
  • Page 64 How to use each feature 6)Reading the throttle operation amount Select throttle with touch pad Select [THROTTLE POINT] by scrolling left or right on the touch pad. Keep the transmitter to be monitor in neutral, and press enter to set the neutral point.
  • Page 65 How to use each feature MODEL ● Functions for model select, model name, model copy, model clear can be set. ● High-capacity EEPROM is built in and, it can store data of 250 models, M 01 ～ M 250. MODEL SELECT MODEL ●...

  • Page 66: Quick Setup Wizard

    How to use each feature Quick Setup Wizard < QUICK SETUP WIZARD> ● Quick Setup Wizard is easy set up function when setting up new RC car. MODEL SELECT 1)Select Model menu and Quick Setup Wizard. MODEL NAME MODEL COPY 2)Quick setup screen is displayed.
  • Page 67 ENTER BACK 　○ Initial value SHR (servo response / digital servo) *SSR/SUR/SXR is only compatible with SANWA official devices. 8)Upon completing the setting of response mode, it changes to BIND (bind) setting screen. Perform bind operation as per screen message.
  • Page 68 How to use each feature MODEL NAME MODEL ● A model with the model name of up to 12 characters that contain alphabets, numbers, syllables and symbols can be registered. 1)Select [Model] using the touchpad and confirm by using the Enter operation. CUSTOM TELEMETRY SETTING...
  • Page 69 How to use each feature MODEL COPY MODEL ● The data of the selected model can be copied to another model. TELEMETRY CUSTOM 1)Select [Model] using the touchpad and confirm by using the Enter operation. SETTING MODEL BIND 2)Model copy setting Select [MODEL COPY] using the touchpad and MIXING SYSTEM...
  • Page 70 How to use each feature ● Regarding copy from micro SD card When copying the model, the main memory and micro SD card can select the specification of the copy source and copy destination. It is can be selected by a Select operation when selecting a model on the copy destination selection screen.
  • Page 71 How to use each feature MOVE MODEL ● The order in which model data is arranged can be switched by switching the selected model data to another model data 1) Select [MOVE] with the touchpad and determine with enter operation CUSTOM TELEMETRY SETTING...
  • Page 72 How to use each feature MODEL CLEAR MODEL ● It is the function of clearing (initialisation) the set data of the model. CUSTOM TELEMETRY 　 SETTING MODEL 1)Select the ‘MODEL’ using a touchpad and confirm by using the Enter operation. BIND MIXING SYSTEM...
  • Page 73 How to use each feature DIRECT MODEL SELECT MODEL ● Direct model select can quickly select model when turing on the transmitter with holding assigned trim. CUSTOM TELEMETRY SETTING MODEL 1)Select the ‘MODEL’ using a touchpad and confirm by using the Enter operation.
  • Page 74 How to use each feature BIND Bind menu can connect trasmitter and receiver. Before binding, RF mode and Response mode can be set for using servo, ESC, and so on. BIND SYSTEM ● Selects the output method for the receiver, and set the mode and bind the transmitter with receiver for the servo (analog/digital) and the speed controller.
  • Page 75 　○ Default: SHR Important ● SXR/SUR/SSR is only compatible with SANWA offical product. ● Please note that the analog servo does not work in SUR/SSR/SHR mode. If the analog servo is used in SUR/SSR/SHR mode by mistake it will not work properly and the servo will be broken so never use the analog servo in SUR/SSR/SHR mode.
  • Page 76 How to use each feature Warning ● BIND is not performed at the time of shipment. Always perform BIND with RX-491 receiver before using. ● When the receiver is purchased newly, always perform BIND in transmitter and receiver. ● When settings in BIND menu and response mode settings (SUR/SSR/SHR/NOR) of the channel are done after performing BIND, perform BIND again.

  • Page 77: Key Assign

    How to use each feature KEY ASSIGN SYSTEM ● Function and trim (increase or decrease in the set value of the function) can be assigned to switch (SW 1 to 3), trim (TRM 1 to 5) and DIAL of the transmitter, the function can be switched ON/OFF and set value can be changed while it is operating.
  • Page 78 How to use each feature KEY ASSIGN TRIM ● Set value of each function can be changed between trim 1 to trim 5 using dial. ● In STEP setting the setting of the variation width can be set by one time trim operation and operation direction can also be set by setting REV.

  • Page 79: Custom-List

    How to use each feature CUSTOM-LIST SYSTEM ● Desired menu can be built by setting in the custom list the menu that is to be used frequently. Custom list can be created in each model memory and a list of 4 pages can be created. ●...
  • Page 80 How to use each feature AUX TYPE SYSTEM ● It is a function for setting the operation of AUX1, AUX2 (3ch, 4ch). CUSTOM TELEMETRY 1)Select ‘System’ using the touch pad and confirm it by Enter SETTING MODEL operation. BIND 2)Select ‘AUX TYPE’ using the touch pad and confirm it by Enter SYSTEM MIXING operation.
  • Page 81 How to use each feature Racing mode [R-MODE] SYSTEM ● It is a function to adjust the running characteristics of the RC car by switching the racing mode so that the function corresponding to the racing mode can respond to the changes in the RC car and the road conditions.
  • Page 82 How to use each feature SERVO MONITOR SYSTEM ● The servo output operation of each channel is displayed as a bar graph, and the servo operation can be virtually confirmed. CUSTOM TELEMETRY ● The operating condition will be easy to understand while MODEL SETTING setting functions such as exponential and ARC by using this function.
  • Page 83 ● At the time of using Li-Po cell, if the ALERT VOLT and LIMIT VOLT are lowered and used by Custom, there is possibility Caution of Li-Po battery getting damaged. Do not use the Custom function when you use an original Li-Po battery of Sanwa. ENTER BACK Back to INDEX...
  • Page 84 How to use each feature SOUND SYSTEM ● You can set the key operation, trim, operating sound of switch, performance of the vibrator during operation. 1)Select [SYSTEM] using touch pad and decide by Enter operation. CUSTOM TELEMETRY 2) Select [SOUND] using touch pad and decide by Enter operation. SETTING MODEL 3) Sound and volume, vibrator settings...
  • Page 85 How to use each feature SYSTEM ● You can set the brightness (light/ dark) of LCD (liquid crystal) and the light mode of backlight. 1) Select [SYSTEM] using touch pad and decide by Enter operation. CUSTOM TELEMETRY 2) Select [LCD] using touch pad and decide by Enter operation. SETTING MODEL 3) Set the brightness (light/ dark) of LCD (liquid crystal) and the...
  • Page 86 How to use each feature SYSTEM ● To perform the operation mode of LED and brightness (light/ dark) settings. 1) Select [SYSTEM] using touch pad and decide by Enter operation. CUSTOM TELEMETRY 2) Select [LED] using touch pad and decide by Enter operation. SETTING MODEL 3) Set LED to operation mode and brightness (light/ dark).
  • Page 87 How to use each feature CLOCK SYSTEM ● It is the menu to manage the calendar, clock display and the usage time on the top screen. ● There is [ON TIME1] which is replacement time for battery or the resetable time for charging and [ON TIME 2] which is aims for overhaul of the transmitter.
  • Page 88 ● If not returned to normal operation even if calibration is carried out, carry out the calibration again and return the setting from [USER] to [FACTORY] of factory shipping. If the problem is still not solved, contact Sanwa Services. ENTER BACK...
  • Page 89 How to use each feature TOUCH PAD SYSTEM ● It is a function to adjust the sensitivity (a level that can be sensed by the finger) at the time of operating the touchpad. ● In case of occurrence of any malfunction or in the case when working at a place with high humidity, lower the sensitivity.
  • Page 90 How to use each feature USER NAME SYSTEM ● Username can be registered in the transmitter up to 12 characters such as alphabets, numerical characters, kana, symbols. ● Registered user name is displayed on the opening screen displayed when the power supply is turned 1) Select [SYSTEM] using the touchpad and decide by enter CUSTOM TELEMETRY...
  • Page 91 How to use each feature SETUP SYSTEM ● In Setup, a unit of temperature display of telemetry data, settings such as display settings of the opening logo when the power switch is set ON, operation settings when rearranged to resume setting, left-handedness, username settings are carried out.
  • Page 92 SD card and insert it in the transmitter. ※ About firmware update •Download the latest firmware form Sanwa home page to the micro SD card. Insert it into micro SD slot of EXZES ZIII. ENTER BACK •When you enter [UPDATE] on the firmware...
  • Page 93 How to use each feature FACTORY -RESET SYSTEM ● Reset to factory state by clearing all settings of model data and setting of key assignment etc. 1) Select [SYSTEM] using touchpad and decide by enter operation. CUSTOM TELEMETRY 2) Select [FACTORY-RESET] using touchpad and decide by enter SETTING MODEL operation.
  • Page 94 MULTI SETTING GEAR Multi Setting Gear ● PGS servos can connect to servo port and set program by the Multi Setting Gear function. CUSTOM SETTING TELEMETRY 1) Please connect PGS servos to the servo port, and tap enter SETTING MODEL “M.S.
  • Page 95 *Micro SD card should be inserted to EXZES ZIII. 3. PROGRAM UPDATE: update PGS servo firmware from file from SD card *Please download latest firmware from SANWA HP. Program will be uploaded when PGS servo firmware update. 4. INFORMATION: check current connected PGS servo firmware version...
  • Page 96 MULTI SETTING GEAR [SETTING DATA] PGS－LHⅡ/XBⅡ/XRⅡ Setting data have 6 contents for compatible servos in the below. *Setting data can be set, read, and write servo setting values. 1. READ Read connected servos data 2. LOAD (SD) Load setting data from Micro SD card (if data for PGS servos were saved) PGS－LHⅡ/XBⅡ/XRⅡ...
  • Page 97 MULTI SETTING GEAR ● About setting change PGS－LHⅡ/XBⅡ/XRⅡ PGS servos can be set by Multi Setting Gear funtion by connecting to EXZES ZIII. Setting data can be set on transmitter and write to the conected servo. Please select menu and enter to change setting values.
  • Page 98 MULTI SETTING GEAR 設定変更する機能を選択して調整 7. D06 BRAKE PGS－LHⅡ/XBⅡ/XRⅡ Set brake when stop the operation. If the value sets high, the brake is Ver.SX－PGS 5301103 stronger and it is easy to stop at object point. If the value sets too high, operation speed becomes slow.
  • Page 99 MULTI SETTING GEAR [TELEMETRY & CODE] Telemetry & Code menu is for telemetry and code assign setting. It is able to switch telemetry data on transmitter display. It is also able to switch, turn on and off functions to adjust in AUX CODE. Please insert Micro SD Card to use the functions.
  • Page 100 How to use each feature MOTION STEERING ● Motion steering can operate steering by transmitter angle. CUSTOM TELEMETRY It assigned [SW3] as motion steering and do calibration can work SETTING MODEL motion steering by transmitter angle. BIND When turning on SW3, motion steering can be worked. SYSTEM MIXING When turning off SW3, wheel steering can be worked (motion steering...

  • Page 101: Service And Support

    Transmitter does not Battery voltage too low. Please charge the battery. power on. Sometimes power off Battery connector bad contact. Please contact Sanwa service. unexpectedly. Alarm sound Battery connector bad contact. Please charge the battery. continuosuly. There is no sound when The KEY-CLICK volume is set Please check the SOUND function.
  • Page 102 Assign Function List (TRIM) Screen Function name Screen Function name --- (No Function Assigned) AUX1 AUX1 TRIM-ST Steering Trim AUX2 AUX2 TRIM-TH Throttle Trim AUX1-ACKER AUX 1 Ackerman AUX1 Trim AUX1-D/R AUX 1 Ackerman Dual Rate TRIM-A1 TRIM-A2 AUX2 Trim AUX1-LEFT AUX 1 Ackerman Left D/R-ST...
  • Page 103 Assign Function List (TRIM) Function Name SW1/SW2 Screen --- (No Function Assigned) Anti Lock Brake OFFSET OFFSET AUX1 [STEP] AUX1 Step AUX1 [POINT] AUX1 Point AUX1 [4WS] AUX1 4 Wheel Steering AUX1 [MOA] AUX1 Motor On Axle AUX1 [D-ST] AUX1 Dual Steering AUX1 [BR] AUX1 Brake Mixing AUX1 [BOAT]...

This manual is also suitable for:

M17s

Table of Contents

Save PDF