Download Print this page

BEGA 84761A Instructions For Use Manual

Bollard tube with pir and light sensor

Advertisement

Quick Links

08.21 · Technische Änderungen vorbehalten · Technical amendments reserved · Modifications techniques réservées
!
Pollerleuchtenrohr mit PIR und Lichtsensor
Bollard tube with PIR and light sensor
Support de balise avec PIR et capteur de luminosité
Projekt · Project · Projet
Standort · Location · Lieu
Ø 265
Ø 265
Gebrauchsanweisung
Anwendung
Pollerleuchtenrohr ø 265 mm
mit eingebautem Passivinfrarot-
Bewegungssensor und Lichtsensor.
Für die Verwendung im modularen
Systempollerleuchten-Programm.
Der eingebaute Passiv-Infrarot-Bewegungs-
und Lichtsensor reagiert bei Dunkelheit
auf Wärmestrahlung und schaltet bei
Bewegung durch Menschen oder Tiere im
Leuchtenumfeld ein. Die Programmierung
erfolgt per Smartphone oder Tablet mittels der
kostenfreien App BEGA Tool.
Sicherheit
Für die Installation und für den Betrieb
dieser Leuchte sind die nationalen
Sicherheitsvorschriften zu beachten.
Die Montage und Inbetriebnahme darf nur
durch eine Elektrofachkraft erfolgen.
Der Hersteller übernimmt keine Haftung für
Schäden, die durch unsachgemäßen Einsatz
oder Montage entstehen.
Werden nachträglich Änderungen an der
Leuchte vorgenommen, so gilt derjenige als
Hersteller, der diese Änderungen vornimmt.
EU-Konformitätserklärung
Die BEGA Gantenbrink-Leuchten KG erklärt
hiermit, dass der Funkanlagentyp 84 761 der
Richtlinie 2014/53/EU (RED) entspricht.
Der vollständige Text der
EU-Konformitätserklärung ist unter der
folgenden Internetadresse verfügbar:
https://www.bega.com/conf/de/84761
Instructions for use
Application
Bollard tube ø 265 mm
with integral passive infrared motion sensor
and light sensor.
For usage in the modular system bollard range.
The integrated passive infrared motion and light
sensor responds to heat emission in the dark
and therefore activates in case of human or
animal movement in the vicinity of the luminaire.
Programming can be carried out using a
smartphone or tablet via the free BEGA Tool
app.
Safety
The installation and operation of this luminaire
are subject to national safety regulations.
Installation and commissioning may only be
carried out by a qualified electrician.
The manufacturer accepts no liability for
damage caused by improper use or installation.
If subsequent modifications are made to
the luminaire, the person responsible for
these modifications shall be considered the
manufacturer.
EU Declaration of Conformity
BEGA Gantenbrink-Leuchten KG hereby
declares that the radio system type 84 761
complies with Directive 2014/53/EU (RED).
The complete text of the EU Declaration of
Conformity is available at the following Internet
address:
https://www.bega.com/conf/de/84761
BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com
Montageplatte
Mounting plate
Contre-plaque
Ø 100
Ø 100
Ø 132
Ø 132
Fiche d'utilisation
Utilisation
Support de balise ø 265 mm
avec détecteur de mouvement à infrarouge
passif et capteur de luminosité.
À utiliser dans le programme de balises
modulaires.
Le détecteur de mouvement à infrarouge
passif et capteur de luminosité intégré réagit
au rayonnement thermique dans l'obscurité
et s'enclenche en cas de détection de
mouvements de personnes ou d'animaux
dans le champ d'éclairage du luminaire. La
programmation s'effectue par smartphone ou
tablette grâce à l'application gratuite BEGA
Tool.
Sécurité
Pour l'installation et l'utilisation de ce luminaire,
respecter les normes de sécurité nationales.
L'installation et la mise en service ne doivent
être effectuées que par un électricien agréé.
Le fabricant décline toute responsabilité pour
tout dommage résultant d'une mise en œuvre
ou d'une installation inappropriée du produit.
Si des modifications sont apportées
ultérieurement au luminaire, l'intervenant sera
considéré comme étant le fabricant.
Déclaration de conformité UE
BEGA Gantenbrink-Leuchten KG déclare par la
présente que le type d'installation radio 84 761
est conforme à la directive 2014/53/UE (RED).
Le texte intégral de la déclaration de conformité
UE est disponible à l'adresse internet suivante :
https://www.bega.com/conf/de/84761
84 761
é
c
IP 65
QR-Code
QR Code
Code QR
1 / 7

Advertisement

loading
Need help?

Need help?

Do you have a question about the 84761A and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BEGA 84761A

  • Page 1 Conformity is available at the following Internet UE est disponible à l’adresse internet suivante : folgenden Internetadresse verfügbar: address: https://www.bega.com/conf/de/84761 https://www.bega.com/conf/de/84761 https://www.bega.com/conf/de/84761 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 1 / 7...
  • Page 2: Montage

    L1, le neutre au bornier marqué vornehmen. earth conductor at the PE marked connecting N, et la terre au bornier marqué PE. terminal. 2 / 7 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 3 Gruppe. controls another group. luminaire contrôle un groupe supplémentaire.      BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 3 / 7...
  • Page 4: Circuit Diagram

    Les valeurs par défaut peuvent être réinitialisées werden. à tout moment dans l’application BEGA Tool. In der App BEGA Tool können die Standard- werte jederzeit wiederhergestellt werden. 4 / 7 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 5: Detection Area

    Erfassungsbereich verändern und conduire à des déclenchements intempestifs. zu Fehldetektionen führen. BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 5 / 7...
  • Page 6 Bluetooth est der Test-Modus aktiv ist. interrompue ou que le mode test est activé. 6 / 7 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com...
  • Page 7: Mode Test

    22 002 999 L PIR-Licht Sensor 75 004 867 PIR Light sensor 75 004 867 Capteur de luminosité PIR 75 004 867 BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info @ bega.com · www.bega.com 7 / 7...

This manual is also suitable for:

84 761