SPECIFICATIONS
Model
HT2410E
Voltage
56 V
No-Load Speed
1500 /min
Blade Length
61 cm
Cutting Capacity
26 mm
Weight (without battery
3.1 kg
pack)
Recommended Operating
0°C-40°C
Temperature
Recommended Storage
-20°C-70°C
Temperature
Measured sound power
94.47 dB(A)
level L
K=1.5 dB(A)
WA
Sound pressure level at
86.47 dB(A)
operator's position L
K=3.0 dB(A)
PA
Guaranteed sound power
level L
96 dB(A)
WA
(according to 2000/14/EC)
Front
1.542 m/s
Handle
K=1.5 m/s
Vibration a
h
Rear
1.652 m/s
Handle
K=1.5 m/s
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
PACKING LIST (FIG. A1)
DESCRIPTION
KNOW YOUR HEDGE TRIMMER (Fig. A1)
1.
Hanging hole
Tip protector
2.
Blade
3.
4.
Hand guard
Front handle
5.
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E/HT2000E
Lock-off button
6.
Rear handle
7.
HT2000E
8.
Battery-release button
Latch
9.
56 V
Electric contacts
10.
1500 /min
Battery-mounting slot
11.
51 cm
12.
Batter-ejection
25 mm
Rear switch lever
13.
2.9 kg
Front switch lever
14.
15.
Hanging hole
0°C-40°C
Blade guard
16.
-20°C-70°C
WARNING: This product has been shipped
91.24 dB(A)
completely assembled. The hand guard shall never
K=1.03 dB(A)
be removed during use. Once damaged, replace it
immediately by a qualified service technician.
83.24 dB(A)
K=3.0 dB(A)
WARNING:
understanding of the information on the tool and in this
92 dB(A)
operator's manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize
1.682 m/s
yourself with all operating features and safety rules.
2
2
K=1.5 m/s
2
2
OPERATION
1.790 m/s
2
2
K=1.5 m/s
2
2
WARNING:
to make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
WARNING:
shields, along with hearing protection. Failure to do so could
result in objects being thrown into your eyes and other
possible serious injuries.
WARNING:
could cause serious personal injury, always remove the
battery pack from the tool when assembling parts, making
adjustments, cleaning, or when not in use.
WARNING:
accessories not recommended by EGO
attachments or accessories not recommended can result
in serious personal injury.
Before each use, inspect the entire product for damaged,
missing, or loose parts, such as screws, nuts, bolts, caps, etc.
Tighten securely all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
APPLICATION
HT2410E: You may use this product for trimming the
hedges, shrubs and bushes with a branch diameter of
less than ø26mm (HT2410E) / ø25mm (HT2000E).
The safe use of this product requires an
Do not allow familiarity with this product
Always wear eye protection with side
To prevent accidental starting that
Do not use any attachments or
. The use of
TM
EN
5
Need help?
Do you have a question about the HT2410E and is the answer not in the manual?