Creative SOUND BLASTER RECON3D FATAL1TY CHAMPION User Manual page 7

Jack, Connector,
Knob or Button
1. Auxiliary Line In jacks
THX Trustudio Pro LED
2.
button
3. Headphones button
4. Speakers button
5. Master Volume knob
6. Headphone jack
7. Microphone In jack
8. Microphone Volume knob
Creative proprietary
9.
AND_EXT connector
Creative proprietary
10.
AUX_EXT connector
Creative proprietary
11.
DID_EXT connector
Notes
• *Available for selected models of your audio device in some regions.
• Your Sound Blaster I/O Drive comes attached to a 5¼-inch drive bay adapter. For instructions on
removing the drive bay adapter and installing into a 3½-inch drive bay, consult your Quick Start
leaflet.
• Not compatible with the PCI Sound Blaster series of audio cards.
Description
Connects to playback devices using an RCA
cable.
Indicates the current mode THX Trustudio mode.
Turns on the headphone as output device.
Turns on the speakers as output device.
Controls the volume output on your headphone
or headset. Turn the knob clockwise to increase
the volume and anti-clockwise to decrease the
volume.
Connects to stereo headphones with a 3.50 mm
(1/8-inch) plug or the headphone plug of your
headset.
Connects to microphones with a 3.50 mm (1/8-
inch) plug or the microphone plug of your
headset.
Controls the microphone gain. Turn the knob
clockwise to increase the microphone gain and
anti-clockwise to decrease the microphone gain.
Connects to one end of the analog cable.
Connect the other end to the
con n ec tor o n th e S ou n d B l a st er
Re con 3 D Fa t a l1 ty Ch a mp i on
au d io ca r d
.
Connects to the auxiliary cable on the 5
drive bay adapter.
Connects to one end of the digital cable.
Connect the other end to the
con n ec tor o n th e S ou n d B l a st er
Re con 3 D Fa t a l1 ty Ch a mp i on
au d io ca r d
.
A N D _E X T
¼-inch
D I D_ EX T
About Your Hardware 7