Creative SOUND BLASTER RECON3D FATAL1TY CHAMPION User Manual page 15

Connecting your A/V Receiver using Line level inputs
If your A/V receiver supports multichannel line-level inputs, you can connect them directly to your
audio card's Line Out jacks instead of the Optical S/PDIF Out jack as shown below.
Jack, Connector or
1. Line Out 1 jack
3.50 mm (1/8-inch)
2. surround-to-RCA cable
(available separately)
3. Front Left jack
4. Front Right jack
2
1
Cable
Description
Connects to the Front Left and Front Right
jacks on your A/V receiver, using a 3.50 mm
(1/8-inch) stereo-to-RCA cable (available
separately)
Connects your audio card and A/V receiver.
Connects to the Line Out 1 jack on your audio
card, using a 3.50 mm (1/8-inch) stereo-to-
RCA cable (available separately).
Connects to the Line Out 1 jack on your audio
card, using a 3.50 mm (1/8-inch) stereo-to-
RCA cable (available separately).
Connecting Speakers and Headphones 14
3
4