Connectivity
This section details the connectivity of your Sound Blaster Recon3D PCIe audio card and Sound
Blaster I/O Drive*.
Sound Blaster Recon3D PCIe audio card
Audio Inputs
One 3.50 mm (1/8-inch) Line In jack for Analog Line In or Microphone In
One Optical S/PDIF jack for Digital In
Audio Outputs
Four 3.50 mm (1/8-inch) Line Out jacks for four channel Analog Line Out:
Front Left, Front Right, Front Center, Subwoofer, Rear Left and Rear Right channels
One Optical S/PDIF jack for Digital Out
Interfaces
One 2 x 5 pin Front Panel Header for connection with Intel HD Front Panel Audio standard header
One 2 x 6 pin Header for connection with Sound Blaster I/O Drive
One 2 x 10 pin Header for connection with Sound Blaster I/O Drive
Sound Blaster I/O Drive*
Audio Inputs
Two Coaxial jacks for Auxilliary Analog In (on optional bracket)
One 3.50 mm (1/8-inch) jack for Microphone In
Audio Outputs
One 3.50 mm (1/8-inch) jack for Headphones
Notes
• *Available as an upgrade accessory for selected models of your audio device in some regions.
General Specifications 35