Power Tech Generators PTS-30 Operator's Manual page 51

30 SPECIFICATIONS
Model
Type
Number of cylinders
Bore and stroke
Total displacement
Combustion type
SAE NET Intermittent kW / min
H.P. (SAEJ1349) (HP / min
SAE NET Continuous kW / min
H.P. (SAEJ1349) (HP / min
SAE Standby kW / min
H.P. (SAEJ1349) (HP / min
Maximum bare speed min
Maximum bare idling speed
Order of firing
Direction of rotation
Injection pump
Injection pressure MPa
2
(kgf / cm , psi)
Injection timing (Before T.D.C.)
Compression ratio
Fuel
Lubricant (API classification)
Dimension
(length × width × height)
Dry weight
Starting system
Starting motor
Charging generator
Recommended battery capacity
A Specifications are subject to change without notice.
NOTE (FOR E3BG or T-E3BG type):
A Flywheel type is SAE clutch No.11-1/2, SAE clutch No.10 or its equivalent.
A Flywheel housing type is SAE No.3 or its equivalent.
A Governor drop is within 5%.
A Continuous will operate at the stated rating continuously and have a 10% overload capability for one hour in 12
hours.
A Standby will operate at the stated full rating for one hour in 12 hours. No overload capacity is specified for this rating.
mm (in.)
L(cu.in.)
-1
(rpm)
-1
(rpm))
-1
(rpm)
-1
(rpm))
-1
(rpm)
-1
(rpm))
-1
(rpm)
-1
min (rpm)
Counter-clockwise (viewed from flywheel side)
First opening pressure 18.63 (190, 2275)
Second opening pressure 23.54 (240, 3128)
mm (in.)
kg (lbs.)
V3800-DI-T-E3BG
Vertical, water-cooled, 4-cycle diesel
4
100 × 120 (3.94 × 4.72)
3.769 (230)
Direct injection type (E-CDIS)
—
48.0 / 1800
(64.4 / 1800)
52.8 / 1800
(70.8 / 1800)
1800
—
1-3-4-2
Bosch type mini pump
0.11 rad (6.5°)
19.0
Diesel fuel oil No.2-D
above CF grade
768.6 × 535.5 × 797
(30.26 × 21.08 × 31.38)
290 (639.3)
Cell starter (with air heater)
12V, 3.0kW
12V, 540W
12V, 88AH