Subscribe to Our Youtube Channel
Related Manuals for Smittybilt SB61269W
Summary of Contents for Smittybilt SB61269W
- Page 1 Installation Instructions Ford Bronco Front Skid Plate Part # S/B61269W For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W...
- Page 2 Introduction Thank you for choosing Smittybilt accessories for your Ford Bronco. If you would like to view our full range of available accessories, please visit us at www.smittybilt.com Ford® and Bronco® are registered trademarks of Ford Motor Company. Important Notes Before Starting Carefully read through this entire instruction manual thoroughly before attempting to install this part.
-
Page 3: Box Contents
91263A838 M6X1 FHCS 90-60814 HARDWARE PACK 2 CONTENTS PART NO. DESCRIPTION 84-44183 RAMPED SPACER - M10 For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W... -
Page 4: Installation Instructions
Open the box containing your Ford Bronco Front Skid Plate, check all parts against the Bill of Materials outlined in the first pages of these instructions. If anything is missing, contact Smittybilt Technical Support immediately. Step 2: Remove OE Skid Plate... - Page 5 (d). Align bolt holes with holes that were exposed in Step 4. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W...
- Page 6 If Skid Logo Backplate (PN: 102-12300) is not pre-installed, use the provided M6 hardware to secure the backing plate behind the logo. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023...
- Page 7 Torque to 55NM. Refer to chart on page 7 of instructions for torque specifications. The Installation is Complete For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W...
-
Page 8: Bolt Torque Specifications
Use this only as a guide for hardware without a called out torque specification in the instruction manual. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W... - Page 9 Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are decorative and are not intended to reduce or avoid injury or damage in the event of an accident.
- Page 10 Installation Instructions For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 or Email info@smittybilt.com Ford Bronco Front Skid Plate Rev 1/18/2023 Part # S/B61269W...
Need help?
Do you have a question about the SB61269W and is the answer not in the manual?
Questions and answers