VDO RM 8204 Installation And Owner's Manual page 22

Connection overview, ISO chamber B (loudspeakers), Fig. 3:
Pin Cable colour
B1 Blue
B2 Blue / black
B3 Grey
B4 Grey / black
B5 Green
B6 Green / black
B7 White
B8 White / black
A
Use only loudspeakers with an impedance of 4 Ohms.
A
Do not connect the loudspeakers to earth.
A
Do not connect the booster/amplifier directly to the loudspeaker outputs.
A
Do not connect loudspeakers via an external fader.
Optional connections, ISO chamber C, Fig. 4, 5
Line-out (yellow plug C1):
(adapter cable accessories)
A power amplifier and additional loudspeakers can be linked to the unit via this plug.
CD changer (blue plug C3):
You can connect a digital CD changer to the unit. Please contact the service depart-
ment or your dealer for information on suitable CD changers.
For connection details, refer to the CD changer installation instructions.
Optional connections, socket D
Telephone input (adapter cable accessories), Fig. 6:
Connect the audio / loudspeaker output of your mobile phone / hands-free system
(when using a CI 3000 or MG 3000, for example) to socket D1' via an adapter cable.
For information about setting telephone attributes, refer to SETUP MENU in the
operating instructions.
Telephone muting:
Connect the mute switching output of your hands-free system to the pink
"TEL. MUTE" cable.
Auxiliary input (audio / video):
If you want to use the auxiliary input, you need to activate it in the setup menu (refer
to the corresponding section in the operating instructions).
Video input (CVBS signal):
Connect the video output of the AV source or DVD changer to the yellow socket on
the unit's front panel.
Video signals are output to the screen only if the hand brake signal has been routed
properly (see the next page).
Installation instructions
Connection to loudspeaker
+ Rear right (RR+)
– Rear right (RR–)
+ Front right (FR+)
– Front right (FR–)
+ Front left (FL+)
– Front left (FL–)
+ Rear left (RL+)
– Rear left (RL–)
21
k