Table of Contents
Advertisement
10
Tuner menu:
Setting the waveband
Select the "TUNER" item in the main menu.
Select the waveband.
Press OK to confirm your setting.
Use the 8 and 2 cursor buttons to select the desired waveband.
Press OK to confirm your entry.
To exit the menu, select "ESC" or press the ESC button.
Available wavebands:
FM AST: VHF autostore (automatic storage of 10 strong stations)
FM 123: VHF preset stations (30 freely assignable station memory presets)
AM AST: MW autostore (automatic storage of 10 strong stations)
AM 123: MW preset stations (30 freely assignable station memory presets)
Tuning into stations
Stations can be tuned / scanned in various manners:
Automatic search
In the main menu:
Press and hold the y or x to commence forward / backward searching.
To execute this function from the MM 5600, press and hold the 2 or 8 button.
:
The current frequency is displayed on the status bar.
As soon as a station is found, the automatic search function pauses.
The station's name is indicated on the status bar (provided that an RDS station has
been found).
If TA is active, the radio will search only for stations from which traffic announce-
ments can be received.
Manual search
Open the "TUNER" menu.
Select "TUNING MODE" and confirm this option with OK.
Use the 8 or 2 cursor button to select the "MANUAL" search mode.
Press OK to confirm your entry.
To exit the menu, select "ESC" or press the ESC button.
In the main menu:
Press and hold the y or x button to perform forward / backward search.
To execute this function from the MM 5600, press and hold the 2 or 8 button.
:
The current frequency is displayed on the status bar.
Hold the button down until the desired frequency is attained.
Pressing the search buttons briefly always switches to the previous / next station
memory location.
After 50 seconds, the radio switches back to automatic search.
Operation
Advertisement
Table of Contents
