Cdc Menu - VDO RM 8204 Installation And Owner's Manual

Hide thumbs Also See for RM 8204:
Table of Contents

Advertisement

CDC menu

(CD changer accessory)
Select the "CDC" item in the main menu to set the CD changer as the source.
Prerequisite: CDC must have been activated in the setup menu.
You can play 12-cm audio / MP3 CDs on the CD changer.
A
We strongly recommend only playing 12-cm CDs. Please do not play 8-cm CDs (neither
with nor without an adapter).
A
Do not insert DVDs or shaped CDs in the CD magazine. If you ignore these recommen-
dations, you risk damaging your unit.
The system may not be able to play - either properly or at all - copy-protected audio
CDs which do not correspond to the Compact Disc Audio standard.
Requirements
In order to be played, MP3 files must meet the following requirements:
MP3 file names must have the ".mp3" extension
Bit rate: Maximum of 320 kbit/s, constant or variable
Sampling frequency: Maximum of 48 kHz
Selecting a CD from the CD magazine
Briefly press the VOICE button to select the previous CD in the magazine.
Briefly press the HOME button to select the next CD in the magazine.
Once the end of a CD has been reached, playback of the next CD is commenced.
CDs absent from the magazine are ignored automatically.
Previous / next track (audio CD and MP3)
Press the y or x button on the remote control, or the 2 or 8 button on the
MM 5600 to play the previous / next track on the CD.
If you press the y button on the remote control or the 2 button on the MM 5600
after the first 10 seconds of a track have been played, the CD changer starts playing
it again from the beginning.
Fast forward / rewind
Press and hold the y or x button on the remote control, or the 2 or 8 button
on the MM 5600.
Once the required point on the CD has been attained, briefly press the y or x
button on the remote control, or the 2 or 8 button on the MM 5600.
:
Playback is continued at the normal speed.
Operation
13

Advertisement

Table of Contents
loading

Table of Contents