Inserting/Changing The Map Dvd/Cd; Menu Operation - VDO MS 5600 Manual

Inserting/changing the map DVD/CD

The Power LED is on (e.g. when the ignition is on):
Press the e button on the navigation computer once.
If the Power LED is not on:
Press the e button once at first, then wait approx. 10 seconds and press it a second
time.
The DVD/CD is ejected.
Remove the DVD/CD and insert the new map DVD/CD into the drive carefully with
the lettering facing upward, until it is drawn in. After changing the map DVD/CD,
the system will require several seconds to initialise.
A
Important: Only use original discs with a diameter of 12 cm. Do not insert 8 cm or specially
shaped CDs. This could cause damage to the system.

Menu operation

The central elements for operating the
menu are the cursor buttons 4, 6, 8
and 2 and the OK button.
Press the cursor buttons to move
the cursor (coloured marking) to
the desired menu item.
Press the OK button to confirm the
selection and activate the function.
Press the OK button to adopt the
settings.
Press the ESC button to quit the
menu without adopting the set
value or to move back a menu level.
All the available options are shown highlighted in colour.
Unavailable options are automatically skipped.
Operation
N a v i g a t i o n
Deutschland
Ke m p t e n A l l g ä u
Road:
Special Destination
Address book
Via points
Route criteria
1 : 5 2 h
4 0 0 0 m
T M C
Name:
Nr:
Tel:
Guidance
Destination map
Return
4 9 : 1 8
9