Map Cds; Changing The Map Cd - VDO MS 3100 Owner's Manual

Map CDs

The VDO Dayton Navigation System is based on a database stored in a special format
on a CD. It is recommended always to use the latest update of this map CD.
For pricing and ordering details on map CDs of other countries and areas ask your
authorized VDO Dayton dealer

Changing the map CD

If the ignition is switched on and the red power LED lights up permanently:
Press the W key on the navigation computer.
The CD is ejected.
If the ignition is switched off and if the power LED flashes:
Press the W key.
Wait for at least 10 seconds until the LED stops flashing.
Press the W key again.
The CD is ejected.
Take out the CD and gently insert the new map CD with the printed side facing up
until it is retracted.
The system needs a few seconds for initialisation after changing the map CD.
Notes:
Only use genuine VDO Dayton map CDs. These map CDs are exclusively designed for
use with the VDO Dayton Navigation System and they are only readable by a VDO
Dayton Navigation System.
The CD player of the navigation system does not play any other CDs (i.e. Audio CDs).
Always store map CDs in their protective cases.
Always make sure that the CD you insert is clean and dry.
If the last entered destination address is not (or only partly) on the map CD you
inserted, the whole address (or only the not existing part) is deleted.
MAP CDs
43