Address Book (See Also Chapter Address Book); Destination Map - VDO MS 5400 Manual

Address book (see also chapter Address book)

If the desired destination address is already in the address book, or
happens to be one of the last 20 destinations entered, the address can
easily be used as a destination address:
u
In the "Navigation" menu select the function "Address book",
press the OK button.
u
Select "Retrieve address", press the OK button.
u
Select the address book category, or the destination memory
containing the last 20 destinations by means of "Prev.
destinations". Press the OK button.
u
Select the desired list entry. Press the OK button.
Choose "Quit" from the list or press the left cursor button to leave the list
display without selecting one of the list entries. If maps from different
providers are used it may be necessary to adapt the stored addresses.

Destination map

The destination map can be used to enter a destination by means of:
•
Cursor
•
Co-ordinates
Cursor
If the destination is not in the vicinity of the vehicle location, first
enter the destination as accurately as possible using the keypad (see
Direct address input).
u
In the "Navigation" menu select the option "Destination map", or
u
press a cursor button if the map is already being displayed. The
destination map is displayed featuring a cursor. The cursor marks
the current vehicle location if no destination data has been
entered.
Use the cursor buttons ‚ƒ„ to move the cursor.
u
u
Press the OK button, select "Store", and press the OK button
again, so that the system accepts the position as a destination.
t
First select a large scale for an approximate destination definition. Then
choose a smaller scale to mark the destination accurately with the
cursor. Destinations which are not in the digitised map area can also be
selected. Ensure that correct side of the road is selected when targeting
a destination on motorways.
NAVIGATION
33