Language; Volume; Date / Clock - VDO MS 3200 Owner's Manual

Language

Choose one of the two languages loaded in the system,
or:
Select "
language from the supplied "VDO Dayton Language Loading Software CD".
Select the language to be replaced.
:
You will be prompted to insert the CD.
Insert the CD in the navigation computer.
Follow the system instructions for loading other languages.
Turn now advice
If this option is activated, an additional prompt (e.g. "Now turn right") will be output
directly before a turn-off.
This prompt is activated by default.

Volume

Adjusting the volume:
Place the cursor on the volume slider.
Confirm by pressing OK.
:
The volume adjustment is activated now.
Adjust the desired volume level with the cursor keys 4 or 6.
:
The selected volume setting is announced.
Press OK again to store the setting.
Voice messages on/off:
Place the cursor on the option behind the loudspeaker icon.
Press OK.
Select Mode "
Press OK again to store this selection.

Date / Clock

You can set the format for time and date display as well as the time zone.
Time zone:
The navigation system receives the Universal Time Coordinated (UTC) via the GPS
system.
To adjust the difference between your local time and UTC:
Place the cursor on the value behind "
Press OK.
Adjust the time offset with cursor keys 4 and 6.
Press OK again to store the setting.
:
The displayed time is updated.
" to replace one of the two loaded languages with another
" or " ".
SYSTEM SETTINGS
".
k
51