Traffic Information - VDO MS 3200 Owner's Manual

Traffic information

Use the "Traffic info" option in the main control to
obtain information about traffic conditions in three
different categories:
–
At the car position
–
At the destination
–
On the route
Please note that the RDS-TMC station picked up by the TMC receiver may not
provide any traffic information relating to your destination if the destination is
located outside the station range.
C-IQ Traffic info contents must be activated to ensure this function.
At position
All traffic obstructions in the vicinity of the current position of your car transmitted by
the RDS-TMC station are displayed here.
At destination
All traffic obstructions in the vicinity of the selected destination transmitted by the
RDS-TMC station are displayed here.
On the route
All traffic obstructions on the route are displayed.
If no traffic information is received or there are no traffic obstructions on the route,
the corresponding menu items will be greyed out.
Viewing details relating to traffic information
Select the required traffic report from one of the three lists ("At position", "At
destination", "On the route") in order to view details relating to traffic
information.
:
The first details screen appears:
The following information is available:
–
Road affected
–
Distance to the start of the segment in which the
traffic obstruction is located;
–
Length of the section in which the traffic
obstruction is located;
–
Type of obstruction (e.g. road works, stationary
traffic, closed road).
As soon as you enter the segment affected by the traffic obstruction, the distance-to-go
information will disappear.
* only with TMC extension connected
TRAFFIC INFORMATION*
R
41